Tech Talk for Cruiser owners.
Moderators: toaddog , Elmo , DUDELUX
Posts: 98 Joined: Tue Jul 15, 2008 2:53 pm
Location: Eumundi
Post
by BeauGQ » Sun Jan 04, 2009 2:38 pm
need to see some to get an idea of wat to make
middy cruiser 2" bodylift,2" lift
dual bat, pto winch, bar stainless roof and light racks and 80 series with EFS/procomp 5"sus, 33"BFG KM2s
Posts: 1031 Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300
Post
by joel HJ60 » Sun Jan 04, 2009 3:44 pm
I'm 96% certain there's a thread on this.
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 384 Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria
Post
by stokedapollo » Sun Jan 04, 2009 4:06 pm
joel i think you will find its more like 95 %
pmsl
What I like to say to the buy a GQ thing....
my MQ is a convertable, hows about your GQ! The Finger
Posts: 2072 Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart
Post
by macca81 » Sun Jan 04, 2009 4:19 pm
no no, im sure its only something like 83.8% sure
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 1042 Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY
Post
by SIMMO84 » Sun Jan 04, 2009 5:18 pm
has been done but heres mine not finished yet but you get the idea. Its based on an old school arb bar
Wtb, 105 series rear tyre carrier, alloys and tyres.
Posts: 345 Joined: Mon Aug 04, 2008 8:48 am
Post
by chpd80 » Mon Jan 05, 2009 7:45 am
that is the most pedestrian freindly bar I have seen, Everyone will be running away screaming at how ugly it is that they wont get hit by you.
Man that thing is ugly, ARB are ugly but what have you done
Posts: 249 Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland
Post
by balzackracing » Tue Jan 06, 2009 8:29 am
The bar on my 75
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Posts: 403 Joined: Sun Jun 18, 2006 3:46 pm
Location: vic
Post
by brentz » Tue Jan 06, 2009 11:49 am
now that looks tuff
brentz
TUF-60 starting build soon
Posts: 98 Joined: Tue Jul 15, 2008 2:53 pm
Location: Eumundi
Post
by BeauGQ » Tue Jan 06, 2009 7:48 pm
thats nice was it a tjm or arb bar or neither ? looks Good
middy cruiser 2" bodylift,2" lift
dual bat, pto winch, bar stainless roof and light racks and 80 series with EFS/procomp 5"sus, 33"BFG KM2s
Posts: 5256 Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne
Post
by Struth » Tue Jan 06, 2009 10:28 pm
I knocked this one up just in time for my xmas trip
Posts: 249 Joined: Mon Sep 12, 2005 1:56 pm
Location: moranbah Queensland
Post
by balzackracing » Wed Jan 07, 2009 5:39 am
BeauGQ wrote: thats nice was it a tjm or arb bar or neither ? looks Good
Was an ARB bar, not any more!!!! Winch frame is made of 6mm plate with some 8mm gussets and mounting renforcements. The top tubing and number plate mount is all the is left of the orginal bar.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Posts: 2072 Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart
Post
by macca81 » Wed Jan 07, 2009 6:54 am
struth, put up a pic of ya stainless one... i know how fond of that you are...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 5256 Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne
Post
by Struth » Wed Jan 07, 2009 1:14 pm
macca81 wrote: struth, put up a pic of ya stainless one... i know how fond of that you are...
All such pics will soon be destroyed
Posts: 2072 Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart
Post
by macca81 » Wed Jan 07, 2009 5:59 pm
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 2765 Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there
Post
by shorty_f0rty » Wed Jan 07, 2009 8:27 pm
the rear bar on my 40.. now has wheel carrier
Posts: 98 Joined: Tue Jul 15, 2008 2:53 pm
Location: Eumundi
Post
by BeauGQ » Wed Jan 07, 2009 8:34 pm
thats wat i had in mind but 3 inch top peace
middy cruiser 2" bodylift,2" lift
dual bat, pto winch, bar stainless roof and light racks and 80 series with EFS/procomp 5"sus, 33"BFG KM2s
Posts: 79 Joined: Tue Jun 19, 2007 9:52 pm
Location: Darwin
Post
by 4runnernomore » Wed Jan 07, 2009 8:43 pm
with 35's fitted
Posts: 82 Joined: Tue Mar 27, 2007 4:34 pm
Location: Wilton
Post
by TURBO60 » Wed Jan 07, 2009 10:23 pm
My 60 and my brothers 75
hj75 2h turbo intercooled twin locked longfields 35s
Posts: 26 Joined: Mon Jun 30, 2008 2:05 pm
Location: glasshouse
Post
by andy80driver » Thu Jan 08, 2009 11:11 am
here ya go mate i built this one for my 80 myself.
does anyone else drive along the highway lookin at the banks on the side and wonder "could i drive that??"
Posts: 26 Joined: Mon Jun 30, 2008 2:05 pm
Location: glasshouse
Post
by andy80driver » Thu Jan 08, 2009 11:24 am
and heres me rear bar. i tried to keep em both sort of factory looking to avoid attracting attention from the boys in blue.
does anyone else drive along the highway lookin at the banks on the side and wonder "could i drive that??"
Posts: 2072 Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart
Post
by macca81 » Thu Jan 08, 2009 1:24 pm
i like ya rear bar andy
and in regards to your sig, yes, every single time im driving...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 26 Joined: Mon Jun 30, 2008 2:05 pm
Location: glasshouse
Post
by andy80driver » Thu Jan 08, 2009 3:49 pm
cheers mate the main piece across the back is 150x150x8 angle and i just folded the sides up out of 3 mm and braced it back to the chassis. i had to build it to suit a 2" body lift so i just packed it up with 50x50 box where it sat ot the chassis. took a bit of time and thinking but having all the right gear helped a lot.
does anyone else drive along the highway lookin at the banks on the side and wonder "could i drive that??"
Posts: 1442 Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw
Post
by 75 cruser » Thu Jan 08, 2009 5:00 pm
here is a couple of my 75
come on move over and let the 75 through
Posts: 2183 Joined: Sun Feb 27, 2005 4:15 pm
Location: newy
Post
by evanstaniland » Thu Jan 08, 2009 9:00 pm
here is one of my bundera
and a 100 i found on the net
Evan
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Posts: 3 Joined: Wed Jan 28, 2009 1:11 pm
Location: Victoria
Post
by DASH123 » Wed Jan 28, 2009 2:09 pm
[quote="Struth"]I knocked this one up just in time for my xmas trip
Howdy Struth,
That bar is mint, pm me with a price if you would be willing to knock one up for a 2000 model flared guard Hilux. I'm in vic as well. (Non winch)
Cheers
Darren
Posts: 5256 Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne
Post
by Struth » Wed Jan 28, 2009 2:59 pm
DASH123 wrote: Struth wrote: I knocked this one up just in time for my xmas trip
Howdy Struth,
That bar is mint, pm me with a price if you would be willing to knock one up for a 2000 model flared guard Hilux. I'm in vic as well. (Non winch)
Cheers
Darren
PM on the way
Posts: 64 Joined: Mon Jan 15, 2007 6:35 pm
Location: melbourne
Post
by virtha21 » Wed Jan 28, 2009 8:24 pm
G'day struth, i'd be interested too, if u didn't mind knocking one up for a 92' model hilux, pm me if you are interested, thanks.[/quote]
92 hilux s/c, 33" Mickey T MTZ, 2" susp, 2" shackles, spool rear
Posts: 5256 Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne
Post
by Struth » Wed Jan 28, 2009 9:43 pm
virtha21 wrote: G'day struth, i'd be interested too, if u didn't mind knocking one up for a 92' model hilux, pm me if you are interested, thanks.
[/quote]
PM on way
and a couple more pics so you know what it looks like,
Posts: 750 Joined: Mon Aug 25, 2008 12:06 am
Location: gold coast
Post
by johnsy86 » Wed Jan 28, 2009 10:04 pm
has anyone got a tube front bar for a ln106 they wanna sell cheap or swap for my tjm winch compatible bar cheers
Lj80 tuff truck "mr Grumpy"
Posts: 1105 Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under
Post
by stilivn » Thu Jan 29, 2009 9:42 am
STRUTH just out of interest how much it cost you to knock that up, you wouldnt have any drawing designs or a break down of how you built it, looks really nice, wouldnt mind something like that on my 80 series.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote: Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Users browsing this forum: No registered users and 92 guests