80 series rear bar/wheel carrier

[BIG PUMPER]

does anyone know of anyone who is producing these for a good price and of good quality, it seems hard to pay arb their extortion prices for steel, any help would be appreciated, cheers...

[taps]

Try Kaymar, there rear bars are strong as.

[BJ73]

I got one done recently at Millweld in Bayswater, Vic.

Seems pretty strong and fits a 37" spare.

Good price too.

Got a rear bar, swing-out spare carrier and sliders for the price of a Kaymar rear bar.

Will try and post some pics when time permits.

[BJ73]

Barwork has been done to suit a 2" body-lift

Just need to put on some mud-flaps

[+dj_hansen+]

Slee-offroad through Asassain Offroad in Geelong, or Strongarm by K&N, both bars are nudging the $3k mark but look better than Kaymar IMHO. Any commercially produced bar is around this price unfortunately.

Stay away from the ARB bar as there are reports popping up of the carrier failing over corrugations, along with small rocks being caught up inside the bar and rubbing away paint work/rattling amongst a few other things, and they cost more than the other bars on the market.

That millweld one looks alright, apart from the catch used to lock the swing out

[Remydog05]

yeah does look good!

how much are they?

and by the way what size tyer can you fit on a Kaymer carrier? 35's?

[BJ73]

Mill does this style of rear bar with the swing-out for about $1800

[stinger]

My Kaymar easily fits a 35

[80diesel4play]

That millweld one looks alright, apart from the catch used to lock the swing out

Tent Peg...

Looks good aside from that!

[DAV029]

try this bloke

80lsy gq

ITEM:
Tube Sliders and Tube rear bars made from 32nb 3.2mm wall tube (42mm outside diameter)

now available to be made in 1 3/4 inch seamless tube..this is CCDA spec tube used for internal rollcages etc..outside diameter of this tube is approx 45mm..pm me for cost

CONDITION:
Brand spankers hot off the welder

REASON FOR SELLING:
I make them

PRICE AND PRICE CONDITIONS:

Sliders SWB from $350
LWB from $400

Rear Bars from $425 for GQ
$675 for GU

wheel carriers also available at extra cost..pm me for details and cost to suit your vehicle and preference

EXTRA INFO:
Two mounting systems available for sliders
Sliders attach to chassis using 16mm custom U Bolts. (approx 23mm hanging below the chassis)
High clearance mounting system now available for all models also(8mm only hanging below the chassis) the high clearance mounting system is also very simple to put on

All models available and can build to suit your needs..

extras available including gusseting and strengthening, steel or alloy checkerplate top, 5mm skid plate welded underneath..pm me for details and costs

rear bars attach to factory mounting points


LOCATION:
Redbank Plains near Brisbane..can freight Aust wide at buyers expense

approx freight costs are

Sydney $65
Melbourne $80
Adelaide $85
Perth $150

david@powercruise.net

[andy80driver]

hey mate if ya work a mig alright you can knock up a bar pretty easy this is what i came up with

[MJ80]

Barwork has been done to suit a 2" body-lift

Just need to put on some mud-flaps

this is exactly what i want to make except i dont have the body lift to make things easier :(