Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
alloy Front diff housing dramas 98 grand vitara v6
alloy Front diff housing dramas 98 grand vitara v6
Ha hi ya all u v6 grand vitara Zook owners has this ever happen to any one els a Blown front diff blown to the point of completely Snapping all way around the rear end off the Alloy diff housing were the drive shaft bolts up ? . for couple mths be 4 i did have a diff locking up and release type sounds mainly in Reverse Not on every off road 4bee bash thoe looks like it finnally blew huh . Was doing a boggy Hill climb on 10psi tyre,s dunno why it blew is this a common thing for a 1998 Grand Vitara Auto model to do so wats the cheapest and quick Fix way ? replace the diff centre ? Dose it come out in one part from unbolting from the rear ? Hope to read sum useful comments on this ASAP THANKS TO THOES WHO TOOK THE TIME TO REPLY ME
Last edited by ian scholfield on Mon Jan 19, 2009 4:52 pm, edited 3 times in total.
Just so people can work this out.
zook is a 98 grand vit 5 door v6 auto
Basically bottomed out and pushed the driveshaft through the alloy centre,diff.
can u swap in the earlier steel 3rd member? into this zook?
and if so what models he / i looking for?
Edit- going by this thread
http://www.outerlimits4x4.com/phpBB2/ft ... ight=grand
Do we need to find a Manual GV front carrier?
cheers
zook is a 98 grand vit 5 door v6 auto
Basically bottomed out and pushed the driveshaft through the alloy centre,diff.
can u swap in the earlier steel 3rd member? into this zook?
and if so what models he / i looking for?
Edit- going by this thread
http://www.outerlimits4x4.com/phpBB2/ft ... ight=grand
Do we need to find a Manual GV front carrier?
cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Thanks for the clarification. I could barely understand what the OP said.nicbeer wrote:Just so people can work this out.
zook is a 98 grand vit 5 door v6 auto
Basically bottomed out and pushed the driveshaft through the alloy centre,diff.
can u swap in the earlier steel 3rd member? into this zook?
and if so what models he / i looking for?
Edit- going by this thread
http://www.outerlimits4x4.com/phpBB2/ft ... ight=grand
Do we need to find a Manual GV front carrier?
cheers
Answering your question. Yes it has been done before-changing from alloy to steel diff centres. Search is your friend. Do it before you get flamed.
hey grazza,grazza wrote:Are we talking about the diff centre or pumpkin (case)?
Surely a centre would not be alloy.
yeh the case.
i am going to try get some pics of the zook today
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 67 guests