right bought a new clutch for my feroza and the preasure plate doesnt fit the flywheel and its slightly larger than the old clutch
ive come to the conclusion some one has fitted a applause engine my question is are the preasure plate mounting holes slightly different on these 2 models
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
feroza verces applause clutch issues
Moderator: Tiny
Not in my experience..... I've interchanged the two without any problems before.
The Feroza has a larger pressure plate area than the Applause but there aren't options available so heavy duty or competition Applause bits are an option that works well.
Although you do need to be carefull, Applause competition pressure plates with comp driven plates are way too sudden for my liking.... a competion pressure plate and stock driven plate gave me much better results - but thats a matter of preference.
They share the same bolt pattern and spline count and go straight on so I'm at a loss as to whats going on.
The Feroza has a larger pressure plate area than the Applause but there aren't options available so heavy duty or competition Applause bits are an option that works well.
Although you do need to be carefull, Applause competition pressure plates with comp driven plates are way too sudden for my liking.... a competion pressure plate and stock driven plate gave me much better results - but thats a matter of preference.
They share the same bolt pattern and spline count and go straight on so I'm at a loss as to whats going on.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
well the clutch thats on it is a 190mm the feroza one is 200mm if i put the 2 presure plates together the old clutch bolt holes are about 5mm inside the new one
i tried a terrios clutch which is 190mm but the presure plate still didnt fit
i guess my only option is to buy aferoza flywheel and put that on
i tried a terrios clutch which is 190mm but the presure plate still didnt fit
i guess my only option is to buy aferoza flywheel and put that on
Easy to tell a HC has ...... wait for it...... "HC" cast into the block, exhaust side rear under No.4 cylinder . HD has......."HD".
AFIK the Charade/Applause HC and HD used the same flywheel and clutch so.....?
I'm wondering if the replacement clutch is wrong ?
AFIK the Charade/Applause HC and HD used the same flywheel and clutch so.....?
I'm wondering if the replacement clutch is wrong ?
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
as per the exedy site i found out the following
Manufacturer DAIHATSU LIGHT COMMERCIAL
Model TERIOS
Variant J100G, 1.3 Ltr, HC-EJ EFi SOHC, Note casting in cover 200mm, (234mm P.C.D.)
Year 1997...
Size, Spline OD & No. of Teeth 190 X 22.1 X 20
Manufacturer DAIHATSU LIGHT COMMERCIAL
Model FEROZA
Variant F310SX, 1.6 Ltr EFi 16V SOHC HD-C
Year 1996...
Size, Spline OD & No. of Teeth 200 X 22.1 X 20
I'd be saying the kit you got is wrong...
Manufacturer DAIHATSU LIGHT COMMERCIAL
Model TERIOS
Variant J100G, 1.3 Ltr, HC-EJ EFi SOHC, Note casting in cover 200mm, (234mm P.C.D.)
Year 1997...
Size, Spline OD & No. of Teeth 190 X 22.1 X 20
Manufacturer DAIHATSU LIGHT COMMERCIAL
Model FEROZA
Variant F310SX, 1.6 Ltr EFi 16V SOHC HD-C
Year 1996...
Size, Spline OD & No. of Teeth 200 X 22.1 X 20
I'd be saying the kit you got is wrong...
Who is online
Users browsing this forum: No registered users and 1 guest