hey all. im currently puttin yota diffs under my zook and now have an issue with the steering. im running jimny power steering and superior cross over steering setup and can't obtain a full turning circle. i know it caused by the pitman arm is to short. my question is if there is a another pitman arm that i could exchange with that is longer and the same spline and taper as the jimny box?
ps. i beleive it needs to be round 40mm longer/
any help would be super.
thanks phil
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
modded zook problems.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
modded zook problems.
Suzuki LJ80, hilux diffs, locked, 37 sticky treps on beadlock rims, coilovers, hydro bumps, 1.6efi, auto, crawler gears, mid mount hi mount , exo cage, 103" wheelbase and rear steered.
Is the pitman arm indexed on the steering box properly?
Lots have run toy diffs with jimny power or sierra manual steer boxes with standard length pitman arms. Longer arm will increase it's throw, however are you sure that's the problem? Is it the same when turning both left and right?
Lots have run toy diffs with jimny power or sierra manual steer boxes with standard length pitman arms. Longer arm will increase it's throw, however are you sure that's the problem? Is it the same when turning both left and right?
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
in neither direction can i obtain full turning circle.. if the pitman arm was not centred i should atleast get 1 side full lock. i measured the pitman arm and its 120mm long centre to centre and the crossover arms on the diff are round 150- 160mm in length.
Suzuki LJ80, hilux diffs, locked, 37 sticky treps on beadlock rims, coilovers, hydro bumps, 1.6efi, auto, crawler gears, mid mount hi mount , exo cage, 103" wheelbase and rear steered.
Who is online
Users browsing this forum: No registered users and 124 guests