Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cutting down a UHF Aerials

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 21
Joined: Mon Jan 26, 2009 8:53 pm
Location: Kallangur, QLD

Cutting down a UHF Aerials

Post by Green_Troll »

Is it possible to successfully cut down a UHF Aerial. I need to cut about 200mm of a midrange 4x4 UHF Aerial. Does it work? Need to do this, because it doesn't fit in the garage anymore, and I don't feel like buying a new one.
Posts: 341
Joined: Wed Jun 13, 2007 9:45 pm
Location: Ipswich, Qld

Post by Micky-Lux »

Generally not.

The aerial is a tuned length - that is the length of it is a set fraction of a wavelength, which gives it its resonant frequency. Chopping length off the top will change this, and if you have access to a forward/reverse power meter, you will be able to calculate that its VSWR (voltage standing wave ratio) is less than ideal. Ideal is a VSWR of 1, but generally 1.5 or so is acceptable.

You can't get a shorter whip?
2000 SR-5 turbo diesel, dual airlockers, bit of a lift, some 15x8 sunnies, 32" bighorns, a few spotties, and a wireless, and a kiddie seat in the back.
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

You can get 6" helical wound "stubbies" for less than $20..............

Or you can blow the output stages of your radio for free (cost ~$100-200 to fix)......

Simple maths, really. :roll:
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 21
Joined: Mon Jan 26, 2009 8:53 pm
Location: Kallangur, QLD

Post by Green_Troll »

true, true, I'll just have to stop being tight arse thanks anyways
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Most good communication specialists/workshops can custom tune your antenna, but your better off just asking them for the best item to suit you, pick a size and they will be able to make something to match up


But dont just chop it, as said above you will burn out your "output" if you end up with to much "feedback" in simple terms
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Post by Canyonero 4x4 »

Can you just move it?
Dave
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

Simple answer and most effective is to buy two aerials, one 6 to 9 dB and one 3 dB. Reason being the 6+ dB will be good for the trip out to wherever (on the flat in convoy) and the 3 dB is far better in hilly country. Best bit is you have a "spare" if one breaks (even if it is not the best one for the job).
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

DAMKIA wrote:Simple answer and most effective is to buy two aerials, one 6 to 9 dB and one 3 dB. Reason being the 6+ dB will be good for the trip out to wherever (on the flat in convoy) and the 3 dB is far better in hilly country. Best bit is you have a "spare" if one breaks (even if it is not the best one for the job).
This is the best way to go i use a 7.5db laser for road trips and a 3db RF! mopole for general use the mopole is of a wire eliment and only stands 250MM high and works great with 30watts :twisted: :twisted:
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests