Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nh 3.0 v6 93

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 51
Joined: Sat Nov 22, 2008 6:22 pm
Location: maryborough

nh 3.0 v6 93

Post by pom300 »

went round a corner today and my car stalled restarted it and it ran fine
stopped at the lights again and it stalled restarted it and its fine seems to be everytime i come to stop it stalls can anyone shed any light on this problem,is it an idle solenoid or something?
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

http://www.outerlimits4x4.com/phpBB2/vi ... p?t=130664

Common as buggery. Try pulling out the stepper motor and cleaning. Also clean the throttle body around the butterfly with carby clean and a rag
Top
Posts: 14
Joined: Thu Feb 14, 2008 11:48 pm
Location: South Africa

Post by kev500sa »

Had a similar problem. First try was the stepper motor, also called idle solenoid, on the bottom of the throttle body next to the hot water "choke". Ended up being the ECU.
Top
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Post by Ian Sharpe »

mate , get the NL with 3.5l SOHC, I've had all 3 but thats the best, IMO
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests