Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sd33t how to tell cracked head?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 81
Joined: Tue Apr 26, 2005 7:00 am
Location: Brisbane

sd33t how to tell cracked head?

Post by Rosey55 »

Hi Guys,

Interested to know if there are any tricks to identifying a cracked head on the sd33? Got the head off and cleaned the surfaces with razor blade, can't see any cracks, I heard the cracks can be well hidden.

Where do cracks typically form? is it worth getting engine shop to perform tests while head is off? $70 to get the head skimmed, any harm in getting this? thought it might be money well spent?

thanks
70 series ute
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

id get it done for peace of mind and a quality job. they can prob crack test it for you too?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

Crack testing is the go mate. No idea how much it costs, but its the only way of telling for sure.

Probably wouldn't hurt to get the head and deck checked for squareness too.
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

Post by ssfabricator »

do they use dye penetrant to crack test heads
If i just overtook you head to your nearest mechanic
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

ssfabricator wrote:do they use dye penetrant to crack test heads
And use a uv light to see the cracks, Well thats what i belive they do.
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

ssfabricator wrote:do they use dye penetrant to crack test heads
There is all differne methods, the dye test is only really relible for external cracks that are visible to the naked eye.

The best method I have seen is they heat the head up, & run hot water into the water jackets, this then opens the cracks & you can see water running out.

Alternatively, heat in a bath of water & pressurise the water jacket, air escapes from the crack.

Best to get it checked, they were renouned for cracking.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Posts: 16
Joined: Sun Sep 02, 2007 5:39 pm
Location: redcliffe

Post by modifiedman »

get it reconditioned while its off, done mine few months ago cost me $550 inc head gasket set, mine has a hairline crack between the valve seats on three of the chambers thats the common spot they go but weren't leaking so ill run it till it dies , pray you got no cracks i priced up new head $1000 plus fitting of valves & guides ect about $ 1600 good luck :)
92 gq lwb 4.2 efi cheezy winch bar ,10000 tjm winch ,custom rear tube bar , rock sliders, 35 bfg muds = plenty of battle scars !
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

Good luck.. hope u got no leaking cracks... I not so lucky 1300$ later genuine nissan head with VRS set and seating and fitting valves..
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

modifiedman wrote:get it reconditioned while its off, done mine few months ago cost me $550 inc head gasket set, mine has a hairline crack between the valve seats on three of the chambers thats the common spot they go but weren't leaking so ill run it till it dies , pray you got no cracks i priced up new head $1000 plus fitting of valves & guides ect about $ 1600 good luck :)
mine has one on the same spot, been running fine and hard and hot for about 3 yrs now without a drama.
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

I've had a blown gasket or more likley a cracked head and i have been driving it like that for 2.5 - 3 years as a daily driver, uses water a bit and the temp gets warm but i just watch it and have never worried about it.
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Wish I had coils wrote:I've had a blown gasket or more likley a cracked head and i have been driving it like that for 2.5 - 3 years as a daily driver, uses water a bit and the temp gets warm but i just watch it and have never worried about it.
Reminds me of my old swb, went really well but use to drink water when it was running high on the temp gauge, every 2-3 hrs of highway driving you had to stop and add about 4-5 litres of water.

Never missed a beat, figured either head troubles or head gasket. always kept an eye on it and never got worse, Still have the engine here for a spare
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests