Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Can anyone identify this bit?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 237
Joined: Wed Sep 22, 2004 10:35 pm
Location: Jabiru NT

Contact:
Contact Slug

Can anyone identify this bit?

Post by Slug »

Have removed the Vacuum and Injector pump from my 96 GQ and sent the pump off for repair.... Doing a big clean up before I start work again and found these laying under the front of the truck!!

No bloody idea what they are or where they came from either :shock:

Image
Top
Posts: 9
Joined: Sun Jun 29, 2008 5:37 pm
Location: QLD

Post by 55INR »

dude that 1 on the right looks like a router bit
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

take a photo next to a ruler lol its hard to say how big they are, where did you find em? the one on the left can be a few things....how big are they?
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 241
Joined: Fri Jul 11, 2008 8:19 am
Location: Newcastle

Post by nellyb1 »

they both look like routers bits man.
right. cutting.
left is for spacing the router off the timber.
Top
Posts: 237
Joined: Wed Sep 22, 2004 10:35 pm
Location: Jabiru NT

Contact:
Contact Slug

Post by Slug »

Beats the hell out of me :? No router to have bits laying around for here for miles and the hex is straight cut and not at all sharp. Apologies for the shaky pics... taken pre coffee this morning! I did discover that the 'hex' is a nice slip fit inside the 'button' though :oops:

Image
Image
Top
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

I reckon router bits as well.
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Top
Posts: 156
Joined: Tue Feb 21, 2006 11:41 am
Location: NSW......West of the Sandstone Curtain

Post by ST391GQ »

Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith
Nuthin is ever the same once I own it !!
Top
Posts: 272
Joined: Sun Sep 07, 2008 11:00 pm
Location: Gettin my teef knocked out by tufflux88

bits

Post by k3lst »

i thought they were too small to be router bits, and the shafts that go in the router arent long enough? imo anyway
Top
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

ST391GQ wrote:Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith
makes it seem worthwhile doesnt it, that little bag of useless doo-daas :lol:
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Top
Posts: 237
Joined: Wed Sep 22, 2004 10:35 pm
Location: Jabiru NT

Contact:
Contact Slug

Post by Slug »

ST391GQ wrote:Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith
Mate! Thank you
I owe you a slab :armsup:
At least I can sleep at night now :D
Top
Posts: 156
Joined: Tue Feb 21, 2006 11:41 am
Location: NSW......West of the Sandstone Curtain

Post by ST391GQ »

Slug wrote:
ST391GQ wrote:Nope!!
They aint router bits...
They came out of the injector pump head after you removed the injector pipes from the rear of injector pump when you took it off motor.
Dont worry about them tho....these little widgets are automatically replaced when the pump is overhauled.
How do I know this???
Just had mine done ...and 6 of these little doovers were part of the stuff they gave me in a plastic bag after I parted with $1800 bux for o/haul.

Cheers Keith
Mate! Thank you
I owe you a slab :armsup:
At least I can sleep at night now :D
:rofl: :rofl: :rofl:
No Probs M8...glad I could help out hey
I will take you up on that ...when I finally get to the Territory on one of my extended inland exploring trips in the future.

Cheers Keith
Nuthin is ever the same once I own it !!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 130 guests