Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

smoke on start up 1fzfe 80 series just had head reco.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 33
Joined: Mon Dec 03, 2007 9:49 pm
Location: Brisbane

smoke on start up 1fzfe 80 series just had head reco.

Post by pro093 »

just had the head fully recond because of valve steam seals
were worn and blew heaps of smoke at idle then went away.

now it blows white smoke on start up every time then goes away.
never use to. ony blew smoke when left idling.

when picked the car up they said it will blow smoke untill the
exhaust burns the oil out .now done 2500k's still blow smoke

it has been back to the mechanic , checked PCV and vacum lines
now he's not sure what else,

i checked plugs no. 4 and 5 have oil all over the theads on them.
told the mechanic, still not sure. if it was rings it should do it all the time
i,v been told.

any one got any idea's what it could be
much appreciated

its a 93 auto if it helps

dan
Posts: 108
Joined: Sat Oct 23, 2004 12:01 am
Location: rocky

Post by tiler0172 »

when engine gets upto running temp the piston and rings expand cousing it to stop smokeing had same issue rerung it and no more smoke.
if it aint forced it wont go
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests