Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Coolant hose for oil return?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Coolant hose for oil return?

Post by sootygu »

Finishing the install of the turbo upgrade and need a hose for the turbo oil return to block.

I have a 90 degree coolant hose that will do the job but will this be ok for oil. I wouldn't expect heat to be an issue but not sure about the oil affecting the rubber.

Opinions.
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Coolant hose is no good for oil, it will perish.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

x2. Get oil rated hose or you are wasting your time.
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

x3 it will turn to nothing
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Post by sootygu »

Thanks

Will try RP Wallis, they have a good selection of hoses.
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Not sure where you are in melbourne, but enzed in bayswater (on dorset rd b/t cantebury and mountain highway) were super helpful when i was sourcing hoses, fittings, clamps etc for my turbo install. Speak to Jude (Jude's a dude ;))
Tetanus rolling on 37's
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests