Hi all,
Am about to fit a warm ( Weber DGV, mild cam, headers) 1600 8V to my '87 NT Sierra. Which clutch should I use? Understand a 1.3 flywheel is required but should I only look at Vitara clutches or are 1.3 heavy duty units OK? Part no's would be really helpful! Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
which clutch?
which clutch?
Happiness is life in low range!
I'd be using the vitara 5 speed and a stock suzuki genuine vitara clutch.
The sierra clutch is smaller and I don't believe the vitara clutch will fit in the sierra bellhousing and the bigger clutch is a huge advantage. It also means no adapter plates/starter grinding etc.
Just my 2C.
Steve.
The sierra clutch is smaller and I don't believe the vitara clutch will fit in the sierra bellhousing and the bigger clutch is a huge advantage. It also means no adapter plates/starter grinding etc.
Just my 2C.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 71 guests