Hi all.
I'm looking for some information on some relatively easy engine conversions for my 83BJ42.
I would like a 6 cylinder Diesel, Or even Turbo Diesel.
Anyone done one?
Any help much appreciated.
Cheers
Jonathan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
BJ42 - Conversion
Moderators: toaddog, Elmo, DUDELUX
13bt would be easiest i would imagine..
mitcho off here is doing a 12ht conversion. be interested to see what he ends up with and how long he can keep it rubber side down..
crushers on ih8mud has put a 1hz in a 40 (not sure if its a 42 or not)..
there are a few options for you!
post up some pix of your 42 that your looking at converting? Whats wrong with just slapping a turbo on your 3b?
mitcho off here is doing a 12ht conversion. be interested to see what he ends up with and how long he can keep it rubber side down..
crushers on ih8mud has put a 1hz in a 40 (not sure if its a 42 or not)..
there are a few options for you!
post up some pix of your 42 that your looking at converting? Whats wrong with just slapping a turbo on your 3b?
Lol. I shall get some pictures Tomorrow most probably, Needs a bit of body work done etc.shorty_f0rty wrote:13bt would be easiest i would imagine..
mitcho off here is doing a 12ht conversion. be interested to see what he ends up with and how long he can keep it rubber side down..
crushers on ih8mud has put a 1hz in a 40 (not sure if its a 42 or not)..
there are a few options for you!
post up some pix of your 42 that your looking at converting? Whats wrong with just slapping a turbo on your 3b?
I'm Not sure if it is worth turboing the current engine. Its 302 K old. But seems in pretty good condition, Doesn't blow smoke etc.
Is there a notable performance increase with a turbo? Like, speed etc.
300k is ok if its in good condition. Get it compression tested and see what it looks like. If you continue to look after it and don't rev its tits off, it will handle a turbo ok. I'm considering a turbo for my 3b that has 400k plus.
Will definatley notice performance improvement, hold speed up hills etc.
Mate if your 40 didn't need body work, its would be because it is fibreglass. Try my method if rust removal. Grind, bog, paint brush on kill rust paint, lanolin/fisholin. Is very dodgy, but cheap and quick. Trying to make them too pretty just keeps them off the road.
Will definatley notice performance improvement, hold speed up hills etc.
Mate if your 40 didn't need body work, its would be because it is fibreglass. Try my method if rust removal. Grind, bog, paint brush on kill rust paint, lanolin/fisholin. Is very dodgy, but cheap and quick. Trying to make them too pretty just keeps them off the road.
you can buy kits for 2-3k
or you can home brew it using a stock exhaust manifold flipped, a suitable turbo and adapter plate. Thats it!
Lots of info on forum.ih8mud.com in the diesel section.
I just need to find a suitable turbo. Apparently anything from a 2.0l Petrol will be suitable for a 3.4lt diesel. read up on mud.. HEAPS of info about turboing there..
you'd get 30-40% performance increase by slapping a turbo onto yer 3b straight away..
or you can home brew it using a stock exhaust manifold flipped, a suitable turbo and adapter plate. Thats it!
Lots of info on forum.ih8mud.com in the diesel section.
I just need to find a suitable turbo. Apparently anything from a 2.0l Petrol will be suitable for a 3.4lt diesel. read up on mud.. HEAPS of info about turboing there..
you'd get 30-40% performance increase by slapping a turbo onto yer 3b straight away..
The only reason I'm considering a turbo on the 3b is because of the home brew idea as above. Can do it for sub $1k. Need to do some research first though. And I do have a turboed 2H in my backyard that would go great guns - may still go down this route yet.
Do some research as shorty forty suggested, there are way more people out there that know way more than me on this!
Do some research as shorty forty suggested, there are way more people out there that know way more than me on this!
Dont be jealous mate...shorty_f0rty wrote:13bt would be easiest i would imagine..
mitcho off here is doing a 12ht conversion. be interested to see what he ends up with and how long he can keep it rubber side down..
crushers on ih8mud has put a 1hz in a 40 (not sure if its a 42 or not)..
there are a few options for you!
post up some pix of your 42 that your looking at converting? Whats wrong with just slapping a turbo on your 3b?
How did you go with piping, what did you do? Still got any photos?bj on roids wrote:Ive been there and done this.
I would stick with the 3B and turbo it. Cheaper and easier, I turbo'ed mine on 1 saturday afternoon.
Got the exhaust done on the monday!
If it blows 13B-t it!
I found a thread on this from a few years ago but the photos are no longer available.
Is there a particular make/model of turbo that is better? I read a t3/t4 is the go but that is just the flange type isn't it? I would go with a new one to avoid issues.
Thanks for the help!
Rick
Come on BJ, spill with the info and pix.
I have a mate in the rice scene and gave me some contacts who might be able to help source a turbo once I know more specifics.. basically, go in there with all the info from ih8mud about ideal A/R ratios, housing sizes, what turbos from what vehicles have worked before and they are likely to be able to find a turbo thats suitable at the right price.....
I'm just yet to get that info together but the more the merrier!.
How did you plumb your airbox and what did you do with your power steering (move the resivour to the firewall?)
I have a mate in the rice scene and gave me some contacts who might be able to help source a turbo once I know more specifics.. basically, go in there with all the info from ih8mud about ideal A/R ratios, housing sizes, what turbos from what vehicles have worked before and they are likely to be able to find a turbo thats suitable at the right price.....
I'm just yet to get that info together but the more the merrier!.
How did you plumb your airbox and what did you do with your power steering (move the resivour to the firewall?)
Next time you're over my way gimme a shout, I have all the photos in hard copy... old school..
Did my brothers the same way only about 2 years ago.
I personally used a re-mapped turbo off a Subaru (cheapest)
You can also use little mitsubishi turbo's, hilux/surf, find a cheap GOOD Condition turbo and flip your stock manifold upside down, use the exhaust flange from the turbo and the standard manifold, weld a piece of 1-2" pipe between them, go for something around 2-2.5" and shape it to suit, one will be round the other probably square, but make sure its got decent wall thickness.
I then modified the airbox with a 3" 90degree straight into the top of the turbo.
Took the water cooling from the heater lines (T-pieces)
Oil from the alternator (T-piece) drained back to sump with another banjo at first onto bung, then later pulled sump and welded fitting to go into side.
With my brothers car, we ran 3" stainless tubing all through to the snorkel/airbox etc. Again modified airbox with 90 degree drop straight into turbo, but his manifold was the 13B-t manifold, and turbo, just has a little bit nicer manifold and sits a fraction lower and closer to centre. We swapped out his clutch line, and insulated the new one, and ran an alloy plate over his exhaust.
Both had 2.5" straight through systems.
I was running 20psi, my brother runs between 6-10psi.
We put his turbo on at 240k or so...
Did my brothers the same way only about 2 years ago.
I personally used a re-mapped turbo off a Subaru (cheapest)
You can also use little mitsubishi turbo's, hilux/surf, find a cheap GOOD Condition turbo and flip your stock manifold upside down, use the exhaust flange from the turbo and the standard manifold, weld a piece of 1-2" pipe between them, go for something around 2-2.5" and shape it to suit, one will be round the other probably square, but make sure its got decent wall thickness.
I then modified the airbox with a 3" 90degree straight into the top of the turbo.
Took the water cooling from the heater lines (T-pieces)
Oil from the alternator (T-piece) drained back to sump with another banjo at first onto bung, then later pulled sump and welded fitting to go into side.
With my brothers car, we ran 3" stainless tubing all through to the snorkel/airbox etc. Again modified airbox with 90 degree drop straight into turbo, but his manifold was the 13B-t manifold, and turbo, just has a little bit nicer manifold and sits a fraction lower and closer to centre. We swapped out his clutch line, and insulated the new one, and ran an alloy plate over his exhaust.
Both had 2.5" straight through systems.
I was running 20psi, my brother runs between 6-10psi.
We put his turbo on at 240k or so...
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 4 guests