Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cable for winch

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 43
Joined: Thu Nov 20, 2008 11:52 am
Location: melb

cable for winch

Post by ronno88 »

i need some 50mm battery cable to run my high mount winch of.
iv been quoted $26 a meter which i expected does anybody no where else u can buy this stuff from and if would be dearer or cheaper? cheers
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

welding suppliers. BOC .

and 26 bucks a meter is bullshhit.

I paid $15 a meter for 95mm2 cash no receipt last october at the height of the commodities boom so that should give you an idea of their buy in price.

cheers smittty
innovation is better, better is faster, and fast is all that counts
Top
Posts: 43
Joined: Thu Nov 20, 2008 11:52 am
Location: melb

Post by ronno88 »

thats not a bad idea hammey il go check that out.cheers
Top
Posts: 43
Joined: Thu Nov 20, 2008 11:52 am
Location: melb

Post by ronno88 »

well got my cable this week 50mm2 15 bucks a meter +gst from b.o.c
not as cheap but i think that'ld be plenty to run my winch.
Top
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

Post by brendan_h »

im not very understanding on cable size. what is the diametre of 50mm2 cable?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

brendan_h wrote:im not very understanding on cable size. what is the diametre of 50mm2 cable?
About 8mm diameter of solid copper (working backwards mathematically), with airspaces in the copper wire probably 10mm dia or so of braided copper wire. This obviously does not include the thickness of the plastic/rubber insulation.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

Post by brendan_h »

ok thank you. what about jumper lead as winch wire. can get some cheap ones thats look beefy?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

brendan_h wrote:ok thank you. what about jumper lead as winch wire. can get some cheap ones thats look beefy?
Welding cable would be better, better insulation.

Jumper leads only have to carry a few hundred amps for a few seconds and therefore don't heat up that much. A decent 20-30 minute winch will cause some heat build up in the cables.

I wouldn't be scummy with the insulation and isolation/retention of the cables, could get real ugly real quick (under-bonnet fire, short to earth on your battery, etc).
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 6 guests