Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1 hz and 1hdt

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

1 hz and 1hdt

Post by simkell »

out of stupid curiosity is it possible to put a ihdt head on a 1hz? i know that if it is possible that pistons would need to be changed, but would injectors and injection pump need changing or alterations to the pump required.

i know it would be easier to put a 1hdt in, but i am just curious.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Slugs go with the head, rods go with the slugs, pump gos with the injecters, so yes you can but the only 1hz things left would be block and crank and front timing gears :)
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

sooooo what's a head worth?, if rebuilding a 1hz that needs the pump also rebuilt it may be worth doing? maybe/ :roll:
MUD, MUD, GLORIOUS MUD!
Top
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

umm have to change the crank as well as the 1hdt has piston coolers and the std crank dont clear them
also have to drill some oil gallery holes
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Top
Posts: 310
Joined: Thu Apr 20, 2006 10:38 am
Location: Melb. AU

Post by hdj105 »

v8zuki wrote:umm have to change the crank as well as the 1hdt has piston coolers and the std crank dont clear them
Interesting... As Toyota only list the one part number for the crankshaft for both, and piston squirters for the 1HZ too for that matter.
Greg G
2000 HDJ105
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

simkell wrote:sooooo what's a head worth?, if rebuilding a 1hz that needs the pump also rebuilt it may be worth doing? maybe/ :roll:
You will need injecter lines, injecters, turbo and manifolds etc best to buy a big ended hdt and use your goof bits...i know a guy with a bare head needs new valve seats. He is in wollongong
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 20
Joined: Mon Nov 20, 2006 4:13 pm

Post by BeerCruiser »

You will need the following 1hdt parts to convert a 1hz to a 1hdt.

Head complete with injectors, cam etc.
Pistons & gudgeon pins (32mm pins)
Con rods (1hdt small end is 32mm, 1hz is 30mm)
Injector pump & all injector lines.

As for the block, the only diff is the 1hdt has a oil pressure feed gallery for the turbo on the RH side of the block & turbo oil return on RH side of the main bearing block assembly. Can get around this by picking off oil pressure from the oil pressure switch oil gallery & oil return to the sump for the turbo. 1hz block has piston oil sqirters.

Crankshaft is identical.

Will need a turbo of course.
HZJ75 Ute I/C TD
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests