Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq box in gu?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 12
Joined: Mon Dec 01, 2008 9:18 pm
Location: Australia

gq box in gu?

Post by BUSHY_GU »

Just wanting to know if a gq gearbox and transfer will fit in a gu? Cheers
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

gq box will put the gear shift under the heater box, as shifter locations are different
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: gq box in gu?

Post by bogged »

BUSHY_GU wrote:Just wanting to know if a gq gearbox and transfer will fit in a gu? Cheers
auto or manual, and which one?
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

ozy1 wrote:gq box will put the gear shift under the heater box, as shifter locations are different
Hardly true considering how many boxes there are, and that some are 100% same.
Last edited by NutterGQ on Thu Feb 12, 2009 3:06 pm, edited 1 time in total.
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

okay, i should have mentined that this is the case with the TD42/TB42 box from the GQ going into a GU,
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i put a gq gbox in my gu when i done the engine mod, i had to cut the floor heaps and lower the box. this was in a 2.8lt.
The slave cylinder is on the passenger side aswell.
Image
more had to be cut but you get the jist
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 377
Joined: Mon Mar 20, 2006 5:52 pm
Location: Geelong

Post by tj81 »

a GU transfer wont go in a GQ either without modding the shifter for the transfer. the selector shafts have the slot for the cotter pin in a different location, meaning the gq shifter wont work with it too good.

wish i had of known this before putting it in, getting to the shifter and thinking....bugger !
92 LWB Ford Maverick 4.2, Dual Fuel.

99 GU ST 4.2 Turbo Diesel, Non Intercooled, Tigerz11 w/synthetic, 35"' Bighorns, ARB Compressor, Snorkel.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests