Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Distance between fan blades and radiator with clutch fan

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Distance between fan blades and radiator with clutch fan

Post by Quadcamshorty »

Hi guys,


I need to know the distance from the front of the clutch fan blades and the inside of the radiator in a tb42 gq running the stock fan setup.

Its a long story, but I want to go back to the stock setup but I also need the radiator to move further into the engine bay than normal so I need to know how far it can move in without fouling the fan setup.

Thanks in advance.
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Posts: 103
Joined: Tue Sep 02, 2008 9:47 pm
Location: tassie

Post by tassie wombat »

just make sure that the fan is inside the shroud.
Top
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Post by Quadcamshorty »

I am looking to move the rad closer to the engine,, so the fan will be further into the shroud, thats why I was interested in how much clearance there is with the stock fan setup.

If I could move the rad 25mm towards the engine that would be plenty.

If anyone knows the clearance, let me know.

cheers
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Posts: 29
Joined: Tue May 08, 2007 1:34 pm
Location: Bris vegas

Post by DA DUDE »

tassie wombat wrote:just make sure that the fan is inside the shroud.

i could be wrong here BUT i alway,s thought that the fan blade should be 50/50 meaning 50% in and 50% out of the shroud so the air does not dam up inside shroud.
shit happen's & ass holes cause it
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

Post by micks troll »

Mate the answer to you question is roughly 65mm from edge of fan blade to radiator core! Mine is a 88 stock tb42 with Davis Craig viscous hub (should be the same as standard)
Just make sure the viscous hub isn't wobbly like my old one as it nearly hit the radiator but distroyed some of the shroud!
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Post by Quadcamshorty »

thanks mate!

The fan and hub would be brand new, so it should be safe for a while.
Also if it drops to 45mm it still leaves a fair bit of room incase of failure.

thanks again.
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 56 guests