Hey guys,
Just a quick question about how to stop water from destroying every part in my car. I know the simple solution is just not to go in it but thats no fun at all haha . I was playing round in the mud on the weekend and was having heaps of fun until I tried to start my car up the day after. Turns out the starter motor has died and ive now had to replace that. The alternator has also died but that was about a month ago now and I'm pretty sure that was just old age. I have a petrol v8 disco and am wondering how and what to keep the water away from? I know about the dizzy, alternator and air box but didn't realise the starter motor. It's so low and I'm not sure what I can do to protect it. I'm thinking about putting a box round the dizzy or even just a rubber glover with the fingers cut out haha! Any advice? Wishing I had a diesel right now
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How to protect your car from water?
Moderator: Micka
Starter should be sealed, glove is 1 way along with an alloy shield to guard the dizzy from water thrown up by the fan, also some guys pressurise the dizzy cap with a small air horn compressor. Or fit a HEI dizzy with coil in cap.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Starter motors and alternators on diesels don't like water either
You might want to consider moving the engine ECU if it's under the seat on your model... depends how deep you want to go though. Without extending/altering the loom you can normally get the ECU up high inside the dash somewhere.
You might want to consider moving the engine ECU if it's under the seat on your model... depends how deep you want to go though. Without extending/altering the loom you can normally get the ECU up high inside the dash somewhere.
--
http://www.youtube.com/watch?v=sgOkVX1hRBk
http://www.youtube.com/watch?v=quwKyabF-2k
[url=http://www.yorkshireoffroadclub.net/]Yorkshire Off Road Club[/url]
http://www.youtube.com/watch?v=sgOkVX1hRBk
http://www.youtube.com/watch?v=quwKyabF-2k
[url=http://www.yorkshireoffroadclub.net/]Yorkshire Off Road Club[/url]
Who is online
Users browsing this forum: No registered users and 6 guests