Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need threaded studs (metric fine)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

need threaded studs (metric fine)

Post by brendan_h »

ive managed to strip a stud. i am now having a hard time finding a replacment. just wondaring if anyone know/has/can get some studs

needs to be about 10mm threaded then go into a non threaded part for about 10mm then the reast doesnt matter too much. i will post up a pic tomrow

basicly somthing like this

/////|||||////////////////
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: need threaded studs (metric fine)

Post by bogged »

any bolt place should be able to help you

what is it out of? If its an engine, most engine rebuilders will have them
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

As Bogged said above or get some rod and get busy with a die.
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

I have a couple each of 10x1.25 both ends or 10x1.25 - 10x1.5 just put in the car. collect tomorrow from Homebush 0700 - 1530 or from Seven Hills after 4pm.


email before 0600 tomorrow or shoot me a txt 0404016235 if you want them.
Free air locker to the first 20 callers!
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

need threaded studs (metric fine)
So, you're after a neatly dressed asian/european???


ive managed to strip a stud.
Depending on your orientation this could be a positive.

Seriously, they generally come in standard sizes and most pitches, and should be available from most nut/bolt distributors, eg Boltbarn.

Try a repacement wheelstud from Nissan/Toyota/Mazda/et al
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Is it a wheel stud or a manifold stud? Repco carries alot of that stuff and most of the time they have vehicle specific listings, give them a call or give us some more info.
Top
Posts: 782
Joined: Tue Mar 08, 2005 12:03 pm
Location: brisbane

Post by giantracing »

most bolt shop dont keep them........................

any exhaust shop keeps a shit load of studs for manifolds................
build em tuff, drive em ruff.........

Custom 4wd Creations Brisbane
0438279890
Top
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

Post by brendan_h »

is just a custom thing so its not off anything spasific. will try an exhaust shop.

thanks
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests