Tried searching but couldnt find much...
Im going to bobb the tray on my 85 hilux... i know tonka did his
im after any info on ways of doing this mod ... pics would be great
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Bobbing the bed
Moderators: toaddog, Elmo, DUDELUX
Bobbing the bed
"The object of war is not to die for you country, but to make the other bastard die for his." - General George Patton
Few pics in this thread by ausyota http://www.outerlimits4x4.com/ftopic114 ... am+carnage
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
cutting tray
hey mate it is better and easier to weld from the outside as u can grind them back and prevent excess bogg i have just completed my sceond ute chop the main part is to keep ur cuts spot on so they line back up doing this will make ur job very easy to finish off308LUX wrote:is it better to weld inside or from outside ?
cheers good luck
Who is online
Users browsing this forum: No registered users and 4 guests