Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

patrol ute cab?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 34
Joined: Sat Jan 12, 2008 11:26 am
Location: shepparton

patrol ute cab?

Post by kopdis »

hey guys just wondering if any one can tell me the difference between the gq and mq ute cabs? im wanting to convert it to a single cab ute and just wondering will i run into any problems with a mq cab cheers.
Posts: 51
Joined: Fri Mar 31, 2006 5:30 am

Post by Tony WestOZ »

Which way are you going? GQ cab on a MQ chassis or MQ cab on a GQ chassis

The bolt points locating the cab to the chassis are the same. However the GQ floor bulge to cover the gearbox is larger. I am not sure if the cab extension was on the series I GQ cabs but its on the series II`s. Gives a little more room over the MQ cab.
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

tony is the bolt points same for all the types ie swb mq and swb gq
What I like to say to the buy a GQ thing....

my MQ is a convertable, hows about your GQ! The Finger
Posts: 51
Joined: Fri Mar 31, 2006 5:30 am

Post by Tony WestOZ »

In regards to bolt points, basicly any ute cab will bolt onto any GQ, MQ Nissan chassis weather it is a leaf or coil cab.
How you would go with wagon and swb cabs ( apart from the front 4 bolt points ) I don`t know. I was only interested in ute cabs when I was looking to do my mods.

The only problem would be the MQ going onto a GQ as the gearbox hump is larger on the GQ.
Posts: 34
Joined: Sat Jan 12, 2008 11:26 am
Location: shepparton

Post by kopdis »

ok thanks mate im looking at going from my gq LWB wagon to a ute its got the 3ltr vl turbo motor in it and the gearboxs are small compared to the other patrol gearboxs bu may still become an issue maybe?
Posts: 71
Joined: Thu Aug 03, 2006 9:43 am
Location: Elizabeth S.A.

Post by -ET 4wd- »

I know they will weld together good! amd they are very close to the same size (MQute-GQ wagon)
This is what they look like welded together,
Image

Not bad for 2 amatuers and 3 days work!

Steve.
GQ Space Cab V8. Team Toxic, Sponsored by Dobinsons Suspension Sydney 02 4647 8295 Loveday 4x4 Adventures, Sharmans Engineering, Lightforce, R&B Tiling Services, CW Crash and my long suffering wife.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests