Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ question what is the Brass block used for

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 42
Joined: Fri Jun 04, 2004 9:45 pm
Location: Melbourne Western Suburbs

GQ question what is the Brass block used for

Post by fastest »

I have a LWB TBE4.2 there is a Brass block with a Bleeder nipple located behind the rocker cover against the firewall. what is this for??? what is it connected to that needs bleeding.

Thanks
Fastest
Don't Follow Me... I'm Lost Too...........
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Just guessing here but would it be a high point in the cooling system and it's an air bleed?
Top
Posts: 43
Joined: Mon Oct 23, 2006 8:47 pm
Contact:
Contact gq banger

Post by gq banger »

It is part of your clutch hydraulics. It makes it easier to bleed whenn you replace your clutch master cylinder.
Terry
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

if you bench bleed the cylinder you very rarely have to touch that bleeder.
http://www.mothfukle-engineering.com/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 74 guests