Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LT 230 Transfer

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 13
Joined: Wed Dec 31, 2003 12:36 pm
Location: Melbourne

LT 230 Transfer

Post by Hardtop_110 »

Hi All

I have a question re my LT 230 transfer case that someone might be able to help with. The transfer is currently apart on the bench.

When the selector sleeve is engaged there is slight movement between the sleeve and the gear. This happens in both High and Low gears. Is this 'normal'?

Image

Also is there anything else I should check or be aware of while it's apart?

Thanks in advance

Daryl
Daryl Snowdon
Melbourne Australia
1954 86" Series 1 Hardtop - 'under construction'
1993 110" Defender Hardtop
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I think this is normal, series cases have this play and that is how the T-case locks into a gear so it doesn't jump out.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests