Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need complete new Draglink ends today for a HJ75

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 35
Joined: Sun Aug 24, 2008 7:25 am
Location: Alexandra Hills Qld

Need complete new Draglink ends today for a HJ75

Post by FJ turbo 75 »

As the title suggests i need desperatlly a complete lh & rh end for my drag link on my 85 HJ75 .
Have put the kits through them yesteday hoping this would be enough but it would seam that the rod end housings themselves are worn out and also the ball .
I 'mm hoping Repco will have these complete ends , does anybody know whethere they do carry them or have any other suggestions as to where else i might find a set in Brizvegas
Am also chasing some nolathane shackle bushes for the same truck

Thanks Andrew

PS am in the Redlands area and am willing to travel to pick up
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

Repco will have them, thats where I got my set from
Posts: 43
Joined: Sat Feb 07, 2009 11:57 am
Location: gladstone

Post by hoppy's79 »

REPCO.

Rip
Every
Poor
C#$T
Off

try you local 4by shop or something mate probably be a hell of a lot cheaper with same quality :twisted:
Ladncruiser 79 series.
turbo/intercooler
Coil conversion, 4 link setup
4" suspension lift, 2" body lift
Front & rear arb air lockers
35" maxxis mudzilla's.
Pro comp extreme alloy's
Posts: 35
Joined: Sun Aug 24, 2008 7:25 am
Location: Alexandra Hills Qld

Post by FJ turbo 75 »

Thanks guys
Hopefully i won't get to ripped as i have an account with them and so get a reasonable discount .

Andrew
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

hoppy's79 wrote:REPCO.

Rip
Every
Poor
C#$T
Off

try you local 4by shop or something mate probably be a hell of a lot cheaper with same quality :twisted:
i call em RIPCO for the same fawkin reason ..

But they willmost likely have the bits ya want tho at twice the coin good luck :D
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

my last ripco part was cheap in comparison to toyota. but only lasted a week... so i went to toyota second time around and bent over... more than 3 times the price. the girl at the counter laughed at my face when she told me the price :oops:
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 100
Joined: Fri Jan 26, 2007 6:45 pm
Location: Logan (since amalgamation)

hj75 tie rod ends

Post by Dents LN65 »

I have complete tie rod kits in stock has all 4 ends
send me a PM i can do special price as its ex - Landcruiser Mart stock
Hilux Wreckers Chinderah NSW
Shed 12 / 11-13 Morton St
Chinderah
ONLY 1hr FROM BRISBANE!
Ph. 02 66743307
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests