Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats the best lift to fit 35's to GU Wagon

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Whats the best lift to fit 35's to GU Wagon

Post by ANIMAL »

Looking at putting 35's under my 2006 4.2 td6 GU wagon tourer.What is the minimun suspension lift required to run these.Wagon fitted with all the friut , fridge/draws/barrier.Suspension and tyres just about last on the list.Your thoughts and ideas are appreciated.

Animal.
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

i dont know about minimum but my 5" fits them easy as just make sure you get a negative rim offset so the rear doesnt rub on the inner guard

i reckon you could get away with a 3" lift.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

3 inch H/D lift is fine.

once you go bigger you need to open your wallet and dig deeper

My Gu with 35 inch Claws

Image
Image
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sagged 3inch with 36 (Q78) swampers.

Image
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

what sized offset do you use on your rims bogged?
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

matto wrote:what sized offset do you use on your rims bogged?
they arent mine they are little rolys ones..
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

I've got 35 simex and 315 MTR's under a 4" flexy lift no worries... could be done on a 3" i reckon.
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 54
Joined: Sat Dec 15, 2007 10:15 am
Location: Central Qld

Post by ANIMAL »

Thanks guys ,now to work out what tyre to go - got a new spare on back
cooper s/t 275/70R 17 but would prefer 35's.Might get a good deal at the 4wd expo in Brissy.

Animal
Top
Posts: 257
Joined: Sun Mar 25, 2007 7:44 pm
Location: D' Aguilar

Post by beast of a GQ »

R you still running your rear swaybar bogged. I have a 3" flexy lift and i dont have my swaybars in. My 33's rub reasonably hard and thats with cruiser offset rims. Im just gonna extend the bumpstops.
04 GU Wagon 3L TD. 33's, 3" flexy coil lift. Kicker stereo, LOUD

GQ TD4.2 Extra Cab, 6" Flexy coil lift, Pro comps, 3rd's upper and lowers, 37 boggers. Plenty more to come.
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

2 inch lift easy. J-top is running 38's with a 3 inch lift on his GU.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Re: Whats the best lift to fit 35's to GU Wagon

Post by coxy321 »

ANIMAL wrote:Looking at putting 35's under my 2006 4.2 td6 GU wagon tourer.What is the minimun suspension lift required to run these.Wagon fitted with all the friut , fridge/draws/barrier.Suspension and tyres just about last on the list.Your thoughts and ideas are appreciated.

Animal.
Can do with minimal lift, just make sure you set up your bumpstops properly, and also get some adjustable panhards if you're going 3-4 inch lift as it will help with inner arch clearance on the rear.
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

i would go a min of 3" but i would go 4" with a small lift i reckon ur tyres will rub and hit guards and stuff, no point restricting ur flex u want max flex :cool:
Last edited by money_killer on Wed Mar 11, 2009 6:40 pm, edited 1 time in total.
Top
Posts: 221
Joined: Sun May 18, 2008 9:00 am
Location: canberra

Post by blade 929 »

i run 35 mtrs with a 2" lift no dramas but i did space my front arms 12mm forward , slight rubbing when the rear is flexed right up but i haven't done anything with the bump stops, and the little bit of rubbing on the inner guard is not worth worrying about anyway, i run cruiser off set rims.
set your limits way beyond your ability

member of COR4x4
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 19 guests