hey
my sierra is doing weird stuff on cold starts,
it starts fine for abit at about 1500 or so then after abit it just instantly drops to 900 ish rpm, and its fairly rough then. then after 30 secs or so. it goes back up to 1500 until its warmed up.
i have a 1992 sierra with mpfi 1.6 vitara engine.
me217
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cold start prob
cold start prob
me217
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
The o2 sensor shouldnt affect cold starts, as the ECU will only read from the o2 sensor when the car is at Normal opperating temp. O2 sensors acutally take a short time to warm up and work (time varies, and some o2 sensors are heated so this will vary). The computer uses a coolant temp sensor to check the temp. If it registered cold temp it runs a richer cold start map. Check that your idle control valve is not clogged up as this would cause the problem. Start here, and if you still got problems post up and we can go from there
O2 sensors can be checked, you should see a swing between 0.1 and 0.9 volts when the ecu is running in closed look operation (idle and low load at opperating temp).
Layto....
O2 sensors can be checked, you should see a swing between 0.1 and 0.9 volts when the ecu is running in closed look operation (idle and low load at opperating temp).
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests