Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G16B running rich and idling high

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

G16B running rich and idling high

Post by Taff »

Just finished my G16B conversion into my sierra.

It ran great for the first day but now its idling high and running rich. checked all my sensors and wires and everything seems to be ok. the fuel pressure regulator is hooked up properly and seems to be working. Using the stock vitara fuel pump. the only thing i can find wrong is a hole in the manifold.

any pointers where to look for whats causing this?
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

How is the coolant temp sensor for the engine ECU? Check its not reading bad and keeping the motor in cold start maps? Do you have any vacuum or exhaust leaks?

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

whats it idleing at? and have u got a air/fuel meter on it?

and is it hunting revs or staying constant?
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

coolant temp sensor is hooked up correct

there is a hole in the exhaust manifold right near #4 cylinder.

will recheck for vac leaks.

it is idling at 1500-2000 constant.

when its fully warmed up or cold it has a constant idle but in between it will bounce from 1800-2000 like it is switching fuel maps.
Last edited by Taff on Sat Mar 14, 2009 11:12 am, edited 1 time in total.
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

block off your pcv valve and see what happens. sounds like one i was playing with a while ago. might have had a bit much blow by and the engine was being force fed crankcase fumes, i think we put a restricter in the line from memory
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Check your idle air control valve too, make sure its not full of crud. Do you have an air flow meter, if you do check that you dont have any vacuum leaks after the air flow meter. This will cause high rough idle. If you dont have and AFM ( i cant remember if the G16B does or not :finger:) then make sure your MAP sensor connections are good and the vacum line is not leaking.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Post by HRZOOK »

Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

turns out the hose from the IAC valve to the thermostat was blocked up with lots of brown goop. cleared it out and now its running fine. :D still need some extractors though.
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

Taff wrote:still need some extractors though.
Hurricane brand ;) $240, fit perfect :cool:
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

still running stupidly rich. used 32L over 180km so its sucking it down.

black smoke at idle.

only error code I'm getting is for the VSS.

how do you check a fuel pressure regulator is working correctly?

is it worth getting a new coolant temp sensor for the ECU? is there an easy check for this as well?

its all stock computer / fuel pump / tank
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

turned out to be the inlet side of the AFM was being pinched a little bit by the hose clamp and not letting it spring all the way back.

soooo soo much more responsive off idle now, its not drowning :P
Post Reply

Who is online

Users browsing this forum: No registered users and 69 guests