Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux 4x4 gear stick boot

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 31
Joined: Wed May 21, 2008 10:50 am
Location: nsw

hilux 4x4 gear stick boot

Post by betseylux »

does a standard 4x4 hilux gear stick still fit with a 3 inch body lift?
Thanks
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

I did 2 inch and have trouble with the boot slipping off the transfer stick. the gear stick is a bit funny with 5th and reverse but not enough for me to worry about it.Have heard about people having to modify the hole a bit.
Top
Posts: 31
Joined: Wed May 21, 2008 10:50 am
Location: nsw

Post by betseylux »

thanks, cos im sick of going through mud holes and getting more mud in the truck than on the truck. and the after market ones are just s**t. the trouble you had with the boot sliping off the trany stick does it slip past the gear nob too?
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Nah, just up the taper to the thin part.
Top
Posts: 31
Joined: Wed May 21, 2008 10:50 am
Location: nsw

Post by betseylux »

thanks heaps
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests