Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

slow sierra

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 17
Joined: Mon Sep 08, 2008 12:08 pm
Location: Bunbury WA

slow sierra

Post by deenough »

ive got a 1990 1.3 soft top but it wont go over 90kmh!!! is this normal? a few of my mates rekon theirs can get up2 130kmh... can it be easily fixed? my spark plugs and leads have been changed and its all been serviced recently when i bought it... only thing is my tappets r pretty rattly could this have something 2 do with it?
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

give us some other specs of your car.
ie
tyre size
michael
Posts: 31
Joined: Sun Nov 23, 2008 8:38 am
Location: melbourne

Post by casbro »

Have you changed the wheel bearings in the last few years?
Is the motor stock?
Posts: 278
Joined: Fri Nov 30, 2007 4:14 pm
Location: bunbury

Post by troopy94 »

Woohoo there is a zook slower than mine :D Have you checked the timing and is the air filter clean as i know this slowed mine down alot
Posts: 8
Joined: Sat Nov 29, 2008 7:28 pm
Location: orange

Post by silver fox »

Make sure that when the accelerator pedal is pushed to the floor the throttle butterfly fully opens as this was a problem with mine when I bought it and it wouldn't go over about 90 kmph.
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

try driving with the wind not against it.
Posts: 17
Joined: Mon Sep 08, 2008 12:08 pm
Location: Bunbury WA

Post by deenough »

quote="mrRocky"]try driving with the wind not against it.[/quote]

that limits me 2 west with a morning easterly and n/e in the arvo lol

ok well its stock with stock sized rubber etc nothing i can see aftermarket or fiddled with.

will change air filter coz its reasonably dusty, timing however seems fine. ie. doesn't stall easily or "clatter" (forgot technicle term lol) when working hard at low revs.

how do wheel bearings effect it? they dont make noise anyway but i'll giv the wheels a wobble and a spin 2moro an hav a better look.

in regard 2 the throttle body butterfly i did notice at 90km/h when i back of the throttle it seems 2 pull just as hard at 2/3 as at full and is quite unerving when u come 2 slow down... anyway wen the butterfly doesnt fully open would it be because the cable is stretched etc coz the above would seem 2 point 2 the car just having no guts because of some other reason...

how fast do they go on average stock? i want 2 no how bad mine is lol
Posts: 29
Joined: Wed Apr 09, 2008 4:51 pm
Location: Gold Coast

Post by waxhead. »

I'll bet your timing is out.
Posts: 97
Joined: Sun Feb 01, 2009 9:01 pm
Location: gold coast

Post by c0rrupt »

Remove the restricter under the accelerator pedal
www.goldcoast4wd.com.au for all your Mods accecories, and custom barwork
Posts: 17
Joined: Mon Sep 08, 2008 12:08 pm
Location: Bunbury WA

Post by deenough »

c0rrupt wrote:Remove the restricter under the accelerator pedal
i saw that there was a bolt under the peddle but there seems 2 be no gain in power once i reach about 2/3 anyway...

im def gonna do the timing. get the missus's ol boy 2 giv me a hand... could this explain the rattliy tappets at all? also remember 1 mornin when it was cold it wouldnt go over 80km/h and was pretty rattly...

i guess it an old car just needs 2 be run over an all the kinks ironed out. at least it blows no smoke so i dnt think its totally stuffed lol
Posts: 169
Joined: Mon Jul 14, 2008 4:20 pm
Location: CQ, Aus

Post by Zook_Fan »

not to turn this into a pissing comp like it has before but my stock 1.3L sierra with a reco carby can get up to around 120 without trying to hard, never gone above that but it had some left in it. it can sit on 100 all day without worrying it if that helps
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

how many k's has the motor done ? check the timing then the compression.
Posts: 31
Joined: Sun Nov 23, 2008 8:38 am
Location: melbourne

Post by casbro »

I've had wheel bearings so old on a suz that i bought that the car could bearly be pushed by 2 blokes on flat ground!
I'd also check your vacume lines on the carby ,I just rebuilt a carby and gained about 15k's top speed.
I may be speakin out of turn but if your jets or secondries are blocked up you may be running out of fuel at top revs.
(please correct me if i'm wrong)
Posts: 17
Joined: Mon Sep 08, 2008 12:08 pm
Location: Bunbury WA

Post by deenough »

well i guess it prob a combination of a lot of things after hearing all this... its done 330,000km but pretty sure its been rebuilt which isnt 2 say the carby was or things like wheel bearings were done either. looks like i might hav2 get the jeep in full flight again while the zook gets fixed up.

what im thinkin...
1.adjust tappets-rattly at the moment
2.check wheel bearings and replace
3.adjust timing
4.clean carby and make sure its all up 2 scratch
5.fix oil leaks in sump and rocker cover

damn well i guess i got it cheap. i luv the fact zook parts r so cheap and easy 2 come by especially after the jeep! its a beast already cant wait 2 get it goin properly lol what diiference would extractors make? the ones on ebay look like good value??
Posts: 356
Joined: Sun Jan 01, 2006 12:47 pm
Location: geelong

Post by ronoor »

save your money they do zip on a zook .do sound good though.cheers ron
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

My pick up was crap till i sprayed the carby with WD40 and the little fuel squitter came to life.

Josh
This is where it's at...
http://auszookers.com/index.php

[url=http://auszookers.com/index.php?name=Forums&file=viewtopic&t=5220]The Big Dumb LWB[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests