Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

swb to 110" WBE help needed!!!!!!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

swb to 110" WBE help needed!!!!!!

Post by mud_runner_GQ »

how you going.
im in the process of doing a WBE on my shorty.
But have afew Q's
1. the brake proportoining valve, do you move it? remove it? do something with it??? help!!!
2. how did you do yours???
3. got any pics??

i did a search and looked at ozy1's truck (still runnung coils) and zook60's (again with coils) tryed looking a barstos rig but pics are gone. Any help would be great. i know i have forgotten something but hay, and help would be great.

also wont be running springs, as im going air shock, and will be staying with a 4link.
thanks
Tom.D
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

with my setup my engineer asked me to keep the proprtioning valve so as you know i relocated it, and set it up to suit, i dont really think it does all the much, in mysetup as the spring seems to fall off all the time when the truck flexes,

it will all depens weather you are gunna get your truck engineered or not
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

the truck is off road only
are you able to put a pic of how you mounted it. and extended the lines
thanks
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

were have you guys put this??? need help!! plz!!!
Image
Image
Image

is you can put up some pics.
thanks
tom
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

ill get some pics tomorrow as i lost all mine in a recent computer crash,

as for the brake lines i got some flared joiners and some brake line from the local brake place, if its off road only there is no need why you need to fit it really, as it only alters brake pressure when load is applied in the rear
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

ozy1 wrote:ill get some pics tomorrow as i lost all mine in a recent computer crash,

as for the brake lines i got some flared joiners and some brake line from the local brake place, if its off road only there is no need why you need to fit it really, as it only alters brake pressure when load is applied in the rear
so what you are saying i don't need it. thanks for that.
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

you just have to see where it plumbs back to, cause it has a feed from the master a line to the rear diff, then one back to the front, im not sure where it actually goes thou,

you could also run an adjustable valve in the cab with the re-routed lines and you could adjust it,
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

do you know if you can just adjust it up to say 70-30 and not run the spring??? and i can just mount it to a bracket???
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

there is a bolt, i think its 10mm im pretty sure it adjusts the open and closing distances, like i said mine normally runs without the spring once it falls off, i only refit it when i get home,

there will be someone else with alot more info than i can provide, i thought others would have piped up by now
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

My valve seized years ago so I no longer have the spring on and it pulls up fine. If you aren't running it on the road just get rid of it altogether.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests