Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

When fabrication becomes art.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Struth wrote: Yep, and god look out if it isn't on the drawing.
You would prefer we just wing it and have a guess Struth? ;)
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Top
Posts: 4
Joined: Mon Mar 23, 2009 2:53 pm
Location: Perth

Post by Dylan 191 »

[/quote]

Oh, and boilermakers tolerance is 1/4" if they really try and give themselves a headache, welders work to parts of millimetres with ease :finger:

Cheers.[/quote]

welders working to parts of a mm .... no chance buddy
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

awill4x4 wrote:
Struth wrote: Yep, and god look out if it isn't on the drawing.
You would prefer we just wing it and have a guess Struth? ;)
Regards Andrew.
:D I am worried about being censured for this sort of talk being in Tech instead of GCC.

But I have met and worked with too many boilermakers to consider them good for R&D or developmental work, so IMO they don't fit the environment in which I am used to working metal.

That said they weld very well and understand heat input, etc, all the things taught during the apprenticeship. :D

Cheers
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

double post :oops:
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Struth wrote:double post :oops:
Haha that sounds like the sort of mistake a boiler maker would make. hahahahahahahahahahahahahahahahaha
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

UrbanRedneck wrote:
Struth wrote:
awill4x4 wrote:
Struth wrote: Oh, and boilermakers tolerance is 1/4" if they really try and give themselves a headache, welders work to parts of millimetres with ease :finger:
Cheers.
Dems fighting words Struth :finger:
:rofl: Thought they might be :D

Can't resist a dig at dem big dumb boilies out there, god love their little minds :armsup:
Perfect example today, we have a boily works in our shop doin a job i normaly do ask me for a measurement was told twice it is on there i was told twice it wasnt walked over and pointed straight at it was told that it wasnt clear enough what it was. ONLY DRAWING ONLY MEASUREMENT ON PAGE AND HEADING SAID WHAT IT WAS.
:roll: :roll: :D
I had one ask me if 500kg was 50 kilograms. :?

I asked him to repeat the question twice, just to make sure I hadn't missed a word somewhere.
That said, he could lay welds with a mig that rivaled submerged arc. Just wasn't much good at following drawings.

For tolerance, I design fabrications to +/-1mm per metre. If it needs to be better than that then it gets machined after fabrication.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest