Hi Guys,
im playing with a set of leafs to try to get the front end working the way I want it to.
I'm trying in vain to get the center bolt off the old springs and whilst i will let it soak over night with wd40, im really not seing it come undone.
could i just cut it off with a grinder and replace it with a high tensile bolt with an allen key head (so its still round to fit into the locator hole)?
or is even normal bolts ok seeing as the u bolts hold it all together on the vehicle.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rebuilding Leaf packs
Moderators: toaddog, TWISTY, V8Patrol, Moderators
rebuilding Leaf packs
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Who is online
Users browsing this forum: No registered users and 125 guests