Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
new exhaust
new exhaust
guys getting new exhaust on thursday. Local guy has quoted me $220 from extractors back for 2" system. Does this sound ok? Also want to get extractors, what should i expect to pay. Any info would be muchly appreciated.
Expect to pay another $200 worth or more depending on the brand for extractors, I paid $440 two years or so back on my old Sierra for Local made extractors and exhaust system, that was without a CAT though.
You should try get the whole thing done at the same time though saves on labour costs generally. So $220 from the extractors back doesn't sound too bad, but you should ask if that comes with a new CAT or if they are going to just weld in your old one. The gains from having a new high flow CAT or none at all are going to be greater.
You should try get the whole thing done at the same time though saves on labour costs generally. So $220 from the extractors back doesn't sound too bad, but you should ask if that comes with a new CAT or if they are going to just weld in your old one. The gains from having a new high flow CAT or none at all are going to be greater.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
Any cat is a high flow cat on a Sierra 
I paid $720 fitted for Genie extractors, cat, high flow muffler and two resonators, 1.75" all through. Was quoted mild steel but they did the front half (extractors -> cat + cat -> muffler) in stainless. Nice burble at idle, just slightly more throaty than the pea shooter was, but quiet as on the highway - no drone or noise at all.
Performance? Probably not. Certainly not so much that I can notice a difference in power or economy. But it sounds nice at idle and I'm happier than I would have been with another stocker for some reason
I paid $720 fitted for Genie extractors, cat, high flow muffler and two resonators, 1.75" all through. Was quoted mild steel but they did the front half (extractors -> cat + cat -> muffler) in stainless. Nice burble at idle, just slightly more throaty than the pea shooter was, but quiet as on the highway - no drone or noise at all.
Performance? Probably not. Certainly not so much that I can notice a difference in power or economy. But it sounds nice at idle and I'm happier than I would have been with another stocker for some reason
Who is online
Users browsing this forum: No registered users and 0 guests