Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lightened flywheel

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 162
Joined: Wed Apr 02, 2008 5:48 pm
Location: gold coast, qld

lightened flywheel

Post by zookieboi »

Hey im considering this for my zukute is it worth it ? i head acceleration is better but going up hills they decelerate faster too
any help would be much appreciated
www.auszookers.com
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

whilst they are better for road cars i dont think i would recomend for off road applications. they do make the engine a little revier and a little more ballsy (not much) but they make it easier to stall and rougher at very low rpm. its easy enough to stall a zook as it is. more prone to breaking stuff keeping the revs up and dumping clutch harder etc etc.

i would also think it would heat up faster burning clutches out more quickly if you slip them for prolonged periods.
Posts: 120
Joined: Thu Feb 07, 2008 7:53 am
Location: Chur Bay, New Zealand

Post by Mudbits »

From my experience when fitting a g16a and using the g13a flywheel this seems to be a perfect weighted flywheel and lets the engine rev nice without making it difficult to drive. In my coily I lightened the g13b flywheel as much as I could and it ended up terrible. It revs like crazy but is very jumpy and wont hold the revs up hill and surges on the road so you always have to drive in a lower gear to keep the revs up. 4th gear on the open road or it dies. A bit of weight off is ok but dont go too much unless its a race car.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests