Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Late 1hz timing belt hydraulic tensioner

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4
Joined: Sun Apr 05, 2009 9:23 pm
Location: Beenleigh

Late 1hz timing belt hydraulic tensioner

Post by project40 »

I have a 98 landcruiser 100 series and am after a little bit of info on the timing belt tensioner, on this model it is the hydraulic tensioner and i am wondering how to reinstall it.
Top
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

Post by mikesmith »

hi mate pretty sure its the same as most of the other ones take it out and it fully extends then put it in a vice end to end and slowly compress the pin into it again, you will see a hole in the housing and one in the shaft slide a split pin into the hole so it holds the shaft in. reinstall on car and once the belt is set up ready for tension pull the split pin out and it will spring out again.
Top
Posts: 4
Joined: Sun Apr 05, 2009 9:23 pm
Location: Beenleigh

Post by project40 »

Thanks buddy did exactly that and reinstalled it. Your reply was much appreciated.
Top
Posts: 186
Joined: Wed Aug 30, 2006 3:06 pm

Post by Chook350 »

nt that it should mater but with those type of tensioners its best to keep them the same as they mount wen compressing them, ie, if its vertical then keep vertical, thats just the way iv been taught, have had magna 1s that play up wen compressed in vice
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests