Ok I would like straight answers, no try and search rubbish please (yes ive tried). Ive been chatting to an engineer up here in FNQ. Now what i would like to know is - what was the biggest tyre size that came out factory on any suzuki sierra diffs, LWBs utes maruriti etc.
Thanks for your help, Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Factory tyre sizes
bogged from elsewhereJrZook wrote:Do we know what that roughly equates to in inch?cj wrote:6.00-16
Cheers for the reply
"Old" tyre dimensions are in inches, e.g. 6.00 x 16. The tyre carcass width and height are both 6", so there is no need to specifiy an aspect ratio (it is 1.0), and the overall tyre diameter is 2 x 6 + 16 = 28", in this case.
Ransom note = demand + collage
My 96 1 ltr w/t stockman came with the original spare tyre unused underneath the tray specs are
MRF Estate F78-15LT
94L 4 ply rating
35psi max
Its oldschool chunky and looks pretty cool, must have been a special order or something, i brought it of a farmer/1 owner with 130,000
delivery papers and dealership service history, probably the biggest standard tyre ive seen on a gooki oh and i paid 3k just to rub it in.
MRF Estate F78-15LT
94L 4 ply rating
35psi max
Its oldschool chunky and looks pretty cool, must have been a special order or something, i brought it of a farmer/1 owner with 130,000
delivery papers and dealership service history, probably the biggest standard tyre ive seen on a gooki oh and i paid 3k just to rub it in.
And that's why you can't trust the internetgrimbo wrote:bogged from elsewhereJrZook wrote:Do we know what that roughly equates to in inch?cj wrote:6.00-16
Cheers for the reply
"Old" tyre dimensions are in inches, e.g. 6.00 x 16. The tyre carcass width and height are both 6", so there is no need to specifiy an aspect ratio (it is 1.0), and the overall tyre diameter is 2 x 6 + 16 = 28", in this case.
They're actually a 29" tyre. Go to a tyre shop and ask to look in the tyre and rim manual for the nominal OD. You'll find two sizes listed, a highway size and a traction (mud tyre) size which will be bigger, that's the measurement you need.[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 172
Joined: Sat Jul 10, 2004 6:47 pm
Joined: Sat Jul 10, 2004 6:47 pm
Location: sitting on the back seat of the bus licking your sisters hairy minge
Early sierras had these as standard fitmentmrRocky wrote:My 96 1 ltr w/t stockman came with the original spare tyre unused underneath the tray specs are
MRF Estate F78-15LT
94L 4 ply rating
35psi max
Its oldschool chunky and looks pretty cool, must have been a special order or something, i brought it of a farmer/1 owner with 130,000
delivery papers and dealership service history, probably the biggest standard tyre ive seen on a gooki oh and i paid 3k just to rub it in.
F78-15 or FR7815. They equal the same size as a 205/70R15.
This is the old alpha numeric tyre sizing system. Very outdated and hardly used anymore.
The F is the tyre load capacity
The R or B or no letter of it indicates a radial tyre or not
The 78 is the aspect ratio
the 15 is the rim size
The letter wasn't constant either. as it was based on carrying capacity and not width so it is a very confusing system
[quote="sheps"]
When was the last time you correctly spelled a motor into a car? The people that should stay away from spanners are pedantic English teachers & keyboard spelling nazi's.[/quote]
When was the last time you correctly spelled a motor into a car? The people that should stay away from spanners are pedantic English teachers & keyboard spelling nazi's.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests