Picked up a set of RCI poly seats for my rouki project but what the heck
bolted the suckers in the zook just for the bling of it hehe !
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rci Seats.
Hunted for a while , but found them at American auto parts in hombush.
$69.95 for seat , $69.95 for covers , 5c cheaper NAM
Colours , black/red ,black/black, black / green-yellow-purple -blue
Mounted with a simple 2.5mm flat plate , 420mm -350mm sheet metal jiont supplied and cut for $20 the pair, Just drill to siut the seirra runners and the mount holes on the rci seat.
Half a dozen mutiple lenght bolts requierd for each seat.
So overall cost was around $320 including a can of satin black to paint the mounts.
Trail test -- 14hours I found them to be Good for me on the trail. Although the have minimal padding they are shaped quiet well ,
I do intend to place a piece of high density foam under the sqab ,and if i need to use them on a few hour trip ill through a piece of sheep skin on there as well.
For long trips I wouldn't recommend them as they are a fixed back so you a confined to a single position ,For my car project they will be exellent , I really like the ability to take the cover of with just two studs ,
Makes hoseing the interior out heaps easer.
Larry
$69.95 for seat , $69.95 for covers , 5c cheaper NAM
Colours , black/red ,black/black, black / green-yellow-purple -blue
Mounted with a simple 2.5mm flat plate , 420mm -350mm sheet metal jiont supplied and cut for $20 the pair, Just drill to siut the seirra runners and the mount holes on the rci seat.
Half a dozen mutiple lenght bolts requierd for each seat.
So overall cost was around $320 including a can of satin black to paint the mounts.
Trail test -- 14hours I found them to be Good for me on the trail. Although the have minimal padding they are shaped quiet well ,
I do intend to place a piece of high density foam under the sqab ,and if i need to use them on a few hour trip ill through a piece of sheep skin on there as well.
For long trips I wouldn't recommend them as they are a fixed back so you a confined to a single position ,For my car project they will be exellent , I really like the ability to take the cover of with just two studs ,
Makes hoseing the interior out heaps easer.
Larry
Spazbot Wrote:
Busted!!, Believe me , Im old not sure if i was unconcious or a
sleep hehe
Larry.
Posted: Mon Feb 02, 2004 3:34 pm
--------------------------------------------------------------------------------
well larry was having a nap in the zuk at one stage on the night run, so that cant be that uncomfortable
Busted!!, Believe me , Im old not sure if i was unconcious or a
sleep hehe
Larry.
Re: Rci Seats.
Dozoor wrote:Picked up a set of RCI poly seats for my rouki project but what the heck
bolted the suckers in the zook just for the bling of it hehe !
I am usure which has the higher Bling factor, the colour coded seats or the wood grain steering wheel
Peter.
Who is online
Users browsing this forum: No registered users and 80 guests