Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what radiator for 60 series with 302 cleveland

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

what radiator for 60 series with 302 cleveland

Post by richardsc »

hey guys,do any of the 60 series have the bottom hose running on the left hand side of the radiator,or what have others used when using a cleveland v8 in a 60 series
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

i think that petrol and diesel rads are opposite i believe if not any radiator place can swap em over to required sides and sizes....
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

cheers mate,i should check the seized 2h,s,from memory it was on the right side though,but i could be wrong
Posts: 40
Joined: Tue Jun 05, 2007 10:07 pm
Location: Somewhere in the bush or snow

v8 into 60 seies

Post by Ausi fj »

hi richard, I came across this problem 2 weeks ago when I went to fit a ford 302 into my fj 45. As my landcrusier radiator was new and it is also big enough to cool the V8, I have just bought a new water pump for the engine with the outlet on the drivers side to match radiator and it only cost $99 brand new. Cheaper than buying another radiator. :lol: :lol:
4x4 Addict. 2002 Patrol, 1977 Fj45, 1975 Fj40, 1993 Vitara, 1983 Sierra Off Road Buggy
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

ahhh ok,something to look into, thanks,this cruiser had a radiator hooked up to the cleveland,but was destroyed in recent bushfires,long story,but i originally bought the clevo to drop into one of mine,but now have the extra cab 60 series ute it came from,minus tray and front clip,so just sussing what i need radiator wise,thanks for the replys
Posts: 273
Joined: Sun Jun 08, 2008 4:12 pm
Location: mornington peninsula vic

Post by richardsc »

aus fj,i like your solution,i have a spare radiator in the seized hj 60,plus 2 spare front clips,need to get off my butt and get this machine going again
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests