Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

U-Bolt Flip in a Lux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

U-Bolt Flip in a Lux

Post by Weiner »

Hi guys,

Just got my u-bolt flip kit from superior and wondering what I do with the bumpstop, can I cut up the original one and mount it on the new plate?

What have other people done?

Cheers.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 255
Joined: Thu Mar 15, 2007 8:24 pm
Location: PENRIFF

wegwi

Post by SHANE055 »

I just welded mine to the plate I had to drill the hole in the centre of the bottom of the bump stop a bit deeper so the centre bolt of the spring could fit in
Coil SASed 03 LUX 3.0TD
91 TD 80 series wagon
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Or could mount it on the chassis 80 series front ones go in realy well and only nedd to drill and tap one thread a side to mount them
plenty of parts on the bench
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Ok thanks guys, I will have a look tomorrow and sort something out :armsup:
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

I got the u-bolts in and am wondering is this what they are meant to look like?

I used a rattle gun and they are torqued up pretty high.

Thanks.

Image
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Look like u bolts to me. if there tight just re check them in 100k's or so then 500, then every now and again.
plenty of parts on the bench
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Sic Lux wrote:Look like u bolts to me. if there tight just re check them in 100k's or so then 500, then every now and again.
Do doesn't matter if the bottom of the u-bolt touches or not, they are tight just needed a 2nd opinion :)
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Na it won't be perfect. Just check them every now and then.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Willy Hilux wrote:Na it won't be perfect. Just check them every now and then.
Cheers, I will take her for a spin when its back together and recheck them :armsup:
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 396
Joined: Mon Dec 08, 2008 8:17 pm
Location: elimbah,qld

Post by 83-mud-lux »

im thinking of doing this on y luxbut not completly sure wat else it does except 4 puuting the u-bolt bracket on top of the spring..just wanted to no if it is worth the trouble 2 do it..smiley..
1991 2.8 turbo,ruf,patrol rear springs,inverted 14'' bilsteins,33's,rear locker,winch,sliders plus more...

TUFF MUD 4X4 CLUB!! RIDIN IT DIRTY
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

83-mud-lux wrote:im thinking of doing this on y luxbut not completly sure wat else it does except 4 puuting the u-bolt bracket on top of the spring..just wanted to no if it is worth the trouble 2 do it..smiley..
More clearance, I figure I was going to the trouble of the high steer setup, I may as well do the flip while I was at it.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Weiner wrote:
83-mud-lux wrote:im thinking of doing this on y luxbut not completly sure wat else it does except 4 puuting the u-bolt bracket on top of the spring..just wanted to no if it is worth the trouble 2 do it..smiley..
More clearance, I figure I was going to the trouble of the high steer setup, I may as well do the flip while I was at it.
Yeah have to have hi steer to fit it otherwise the the draglink on the standard steering will hit the u bolt thread.
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 8 guests