Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Eng. Certificate?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5
Joined: Wed Apr 15, 2009 9:54 am
Location: Silverdale

Eng. Certificate?

Post by alesnik »

Hey guys,
I have a 1886 fj 62 toyota landcruiser.
I cut the sills out to put in rock sliders and have been told i need to get an engineers certificate before i can get a blue slip.
Does anyone know of where i can get one, cheap, someone rather leniant, or is this wrong an i dont need one?
Any help much appreciated
Cheers Matt
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

1886, man thats historic.

Um what section of the NCOP was this referred to when you wnet for rego?

What state is silverdale in?
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 5
Joined: Wed Apr 15, 2009 9:54 am
Location: Silverdale

Post by alesnik »

sorry, 1986 :lol:
im in NSW
what does NCOP stand for sorry?
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

This:

http://www.infrastructure.gov.au/roads/ ... _ncop.aspx

Section 1 of LH (NCOP6) states what has to & doesnt have to be certified.

What sort of mod did you do? Have a good read as you might not have to have it engineered, especially because it has a chassis & the sills on a 40 are really not overly strong/structural.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Oh, & the RTA has a list of approved engineers & a couple of other bulletins regarding modified vehicles but you are gunna have to find then yourself ;)

Look for VSI's.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 5
Joined: Wed Apr 15, 2009 9:54 am
Location: Silverdale

Post by alesnik »

im actually on that reading it now.
i cut the sills out just below the doors, made some sliders and bolted them to the chassis.
I dont understand how they were structural as when i got the car they were crushed anyway so i cut them off :roll:
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

That doesn't make them non-structural. :lol: The box section stiffens the side of the car.

I dont think NCOP is current in NSW unless specifically referred to. Check the RTA website for guidelines.

http://www.rta.nsw.gov.au/registration/ ... i_dl1.html


Maybe also try a different blue slipper. Yeah, they may record the numbers etc, but I'd bet they never catch up with you about it.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests