Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 TDi engine

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 15
Joined: Tue Oct 04, 2005 8:11 pm
Location: Croatia (EUROPE)

2.8 TDi engine

Post by zenteren »

I recently bought Patrol from 1999. year with 2.8 Turbo diesel intercooled engine. It has 170000 kilometers.
The cars is accelerating great and has plenty of top end power. I tryed it on the road and it pulls up to 160 km/h with ease.
One thing is bothering me....it's not starting good. When I want to turn the engine on even if it's hot I need to hold the key for 3 seconds at least to start it. When it's cold....in the morning it starts after few long tryes and then the grey smokey cloud goes out off the exhaust.
I've checked glow plug connections and it's got power when I rurn the key. I am confused cause the car won't start even if the engine is hot (emmediately after driving).
Anyone have any cluess about that to help me?
Posts: 213
Joined: Tue Jun 10, 2008 8:54 pm
Location: brisbane

Post by lewie »

I have same motor in my GQ and it starts good when cold but worse when hot i thought it being warmed up would help the starting of the car but seems to be other way round hmm
beer gimme gimme ! ! !
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

There are a few threads about this on the patrol forum.

Mine is the opposite, a bitch to start when cold but that is to do with the glow circuit, I just haven't got around to fixing it. :roll:
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

T_Diesel wrote: just haven't got around to fixing it. :roll:
slackarse
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

bogged wrote:
T_Diesel wrote: just haven't got around to fixing it. :roll:
slackarse
Meh..... It comes in handy.

Thinking of the Wonnangatta arsehat thread in gen chit chat, a couple of years ago a bunch of arsehats arrived late and decided they would camp right next to us, behave like carnts all night and set their tents up with about 10 metres from the back of where my truck was parked.

Come 8am, the next morning we had packed up and were moving on. There was no sign of life coming out of camp arsehat, so I put the truck in neutral and we rolled it backwards so my exhaust was pointing into their tent from about half a metre. Gave it plenty of throttle, no glow and started her up and filled their tent with diesel smoke and fumes through their open tent window.

T_Diesel 1 - Arsehats 0. :finger:
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

Mine had the same problem, fitted an advance plate to the injector pump for the warm start problem, new glow plugs for the cold start, and no problem since
Posts: 15
Joined: Tue Oct 04, 2005 8:11 pm
Location: Croatia (EUROPE)

Post by zenteren »

What is advance plate????
I'll change glow plugs and see what will happen then.
I looked in the serviece manual and find out that the cooling temp sensor is in connection with high pressure fuel pump via main ECU and that could be the cause also
Posts: 65
Joined: Fri May 30, 2008 7:54 pm
Location: Collie WA

Post by MuddyTroll »

Be warned. The glow plugs are damn big $$$ :x
Test them and only replace what you need to.
1997 GQ 4.2 Diesel Wagon
Aftermarket turbo & intercooler, 3" Exhaust,
4" susp Lift, 3" body lift, 35" Muddies
Spotties that start bushfires at 100m
Pleasure in life : Towing Toyotas
Posts: 252
Joined: Fri Sep 02, 2005 3:45 pm
Location: outside your window

Post by hiy6o »

Common problem with the injector pumps , the plate was a nissan fix to get them out of warranty before the pump needed to be done . :x :bad-words: Nissan part No :09621-80901AU You will also need o'ring 16826-V0700 Doesn't fix it for ever so start saving the money to have the pump done .
Nup not telling
you'll have to find out yourself
Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests