Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux body rubbers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

hilux body rubbers

Post by AcTioN13 »

where is the best place to get the hilux body rubbers and bolts?

my rn105 lux has a body lift in it that i want to remove and get back to standard height.

cheers

Jack
Top
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

prob get some on ebay..
ive only seen body lift blocks but ive never been looking for standard ones.
if there arent any id pm one of the guys making the lift blocks because im sure they would have some standard ones if not make some for you.
im swap you my standard ones but my luxy being a 95mod say they'd be pretty shot by now..
good luck
95 lux, Under Construction..
60% of the time it works ALL the time
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

if your lift was done properly, the rubber blocks should still be there! all Body lift blocks do is put a 50mm piece of material between the body and original rubber mounts!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

think the bloke cute the crush tube that was in the original body rubbers
Top
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

some blocks are put on top of the originals and some just replace the old ones.. depending on how much body lift you want.
95 lux, Under Construction..
60% of the time it works ALL the time
Top
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

might have to hassle bursons andsee what price they have on new ones...

then find a wreckers and strip a hilux there
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Chase up the wreckers. Toyota wanted about $50 each. Thats $50 for a top one and $50 for a bottom one. Thats a rough price but for my single cab I think it was close to $700 or $800 for the lot. :bad-words:
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

Struth!!!!!!

jeez my kidneys arent that good, i cant afford to sell one.


hmmm i remember there was a single cab lux at the local wreckers, might have to see if i can strip the thing....

and i remember some funny looking switches in the dash last time i was getting stuff, might have to check them diffs
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 77 guests