G'Day all spanner monkeys
Heres the thing... i have 35's at home ready for use. until i put the gq diffs in, i wanna give em a slosh around. It currently has a 2inch body lift. and i've wound the torsion bars up about 40mm. Is this enough or do i need to chop guards aswell (doesn't bother me)
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Whats needed to fit 35's on a surf??
Moderators: toaddog, Elmo, DUDELUX
Whats needed to fit 35's on a surf??
Wanted.... 4.88 or 4.56 front GQ diff center. Also wanted... GQ rear diff complete.
bolt em on and flex it and see what needs doing, you can run them but run uber bumpstops to stop the carnage, redrilling diff perchs will help with a shaft spacer, cheap to do and better approach angle.
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
no leafs, so no spring perchs...berad wrote:bolt em on and flex it and see what needs doing, you can run them but run uber bumpstops to stop the carnage, redrilling diff perchs will help with a shaft spacer, cheap to do and better approach angle.
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Bronwyn Bishop does it for me.[/quote]
tyres
Has anyone got a set of bj spacers i could buy?
Wanted.... 4.88 or 4.56 front GQ diff center. Also wanted... GQ rear diff complete.
Mr DJ on this site sells them,
http://toyotasurf.asn.au/forum/login.php
I think he's on outers too.
Cheers
http://toyotasurf.asn.au/forum/login.php
I think he's on outers too.
Cheers
Haven't made them for quite a while now, but if you have 1/2 and idea you will see that they are not rocket science to make 
Think you will need to chop the guards a bit to get them to fit, and if your doing that may as well leave it without the spacers. Your limiting factor will be the body mount just behind the back of the front guard, could try adjusting the steering stops out to stop scrubbing.
Think you will need to chop the guards a bit to get them to fit, and if your doing that may as well leave it without the spacers. Your limiting factor will be the body mount just behind the back of the front guard, could try adjusting the steering stops out to stop scrubbing.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Coil SAS by www.budscustoms.com.au
dont need to chop guards , i run 35's on my surf
2" body lift and 3" supension , rubs a bit on the front , need to bash in sills.
dosent come near the guards , maby just trim the front bumper. also 1" ball joint spaces and diff drop spaces will make it rub even less
2" body lift and 3" supension , rubs a bit on the front , need to bash in sills.
dosent come near the guards , maby just trim the front bumper. also 1" ball joint spaces and diff drop spaces will make it rub even less
1993 Surf SSRX 3lt turbo , lots of stuff , and 35's, ho and a brand new motor
tyres
How did you jack it up 3 inches? Wouldn't the top arms pretty much be resting on the rubber stops, limiting your negative travel?
Wanted.... 4.88 or 4.56 front GQ diff center. Also wanted... GQ rear diff complete.
Who is online
Users browsing this forum: No registered users and 6 guests