Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Camshaft Movement

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Camshaft Movement

Post by crispy »

Have finally tracked down a problem i've been having with my sierra lately.
It first had mass distributor problems, with excessive shaft movement, no advance and finally missing teeth.

I got a good s/h distributor and put it in and it made a strange noise and took bit of a chunk out off one of the teeth of the cog. The cog on the cam is fine tho.

There is quite a lot of movement back and forth in the camshaft maybe 5-10mm.
I can't really seem to find what holds the cam in, had bit of a look in the service manual but hasn't helped much.

Any ideas of what has caused this and the solution?
The road to enlightenment requires Four Wheel Drive
Top
Posts: 655
Joined: Thu Mar 20, 2008 12:51 pm
Location: melbourne

Post by Jacked »

Maybe a worn cam and/or bearing surfaces. You need to pull it apart and have a look
Top
Posts: 31
Joined: Sun Nov 23, 2008 8:38 am
Location: melbourne

Post by casbro »

Hey crispy,
Had a similar problem latley turned out to be a flogged out cam sprocket.
http://www.outerlimits4x4.com/ftopic168 ... highlight=
Could also be the cam belt!
Might be time to get the lj back!
Top
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Post by crispy »

Yeah i'll hopefully pull it apart this weekend, i feared with the amount of movement it has, it won't be a simple fix.

Would love to get the LJ back, should of never sold it :roll:
The road to enlightenment requires Four Wheel Drive
Top
Posts: 31
Joined: Sun Nov 23, 2008 8:38 am
Location: melbourne

Post by casbro »

Any updates?
Did you find it?
Top
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Post by crispy »

Nah havent got too much further as yet, only pulled the head off. Kinda on the back burner tho, will update this thread when i actually do something haha
The road to enlightenment requires Four Wheel Drive
Top
Posts: 37
Joined: Fri Jun 06, 2008 10:47 pm
Location: Sydney

Post by fe11xx »

Camshaft thrust bearing worn? Or the cam itself may be worn where it runs on the thrust bearing.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests