Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wrangler MTRs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 48
Joined: Mon Jun 23, 2008 6:39 pm
Location: Sydney

Wrangler MTRs

Post by muffins »

I just wanted to get other people's experience - i've been running 33" mtrs on my pajero and i've gotta say i'm not heaps impressed. In the past two months, i've had two punctures - one a screw from my own driveway, and the other a small crack in the tread after 4wding over the weekend. Add to that a tear in the sidewall which at least so far hasn't caused any problems. Maybe it's just unlucky, but particularly the crack i would not have expected from these tyres. Have other people found them to be susceptible to punctures?
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

there is a thread in here on the MTR....
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

All the info you need is likely in this thread: http://outerlimits4x4.com/ftopic172478.php
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests