Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Injecting a TB42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 74
Joined: Wed Apr 15, 2009 10:11 am
Location: Rockhampton

Injecting a TB42

Post by td lux »

Will the injection system from a TB42e bolt straight up to a TB42? How easy is this to do also how expensive for the hole system ????
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

When you've done it let us know the cost and effort. :D
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

It's a bit of a bugger as Nissan have different looms right through the dash for EFI and carby, it can be worked around. Personally I'd suggest getting the manifold, injectors and fuel pump fit a larger throttle body and a good tune with an aftermarket ECU as you will get easily 10-20 % more power than the stock system. I've fitted and tuned a number and the results are always much better than stock, and you can run twin tunes in case you can't get high octane fuel when away, just flick a switch.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests