Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mq/Mk 5 speed with divorced transfer

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5
Joined: Tue Jun 10, 2008 7:29 pm
Location: Wodonga

Mq/Mk 5 speed with divorced transfer

Post by 302MQ »

Could someone please tell me if a 5 speed gearbox was ever available with an L28 that used the divorced transfer? Or was it only 4 speeds?
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: Mq/Mk 5 speed with divorced transfer

Post by Screwy »

302MQ wrote:Could someone please tell me if a 5 speed gearbox was ever available with an L28 that used the divorced transfer? Or was it only 4 speeds?
fairly confident it was only early 4 speed wagons in divorced....

Im nearly 100 percent that all 5 speeds were with a transfer attached as they are longer then the 4 speed by a fair amount and a divorsed setup wouldnt be practical, and would be tight even under a wagon.

I may be corrected though.... some imports might be different, as might some P40 wagons from europe or even around Aus.....

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

Na, just the 4 speed and auto
Hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
Top
Posts: 5
Joined: Tue Jun 10, 2008 7:29 pm
Location: Wodonga

Post by 302MQ »

Thanks guys.
Top
Posts: 5
Joined: Tue Jun 10, 2008 7:29 pm
Location: Wodonga

Post by 302MQ »

Does anyone know what 5 speed was used in the 280zx? I was thinking it may be possible to use one of these and just modify my jackshaft to suit the different length of the 5 speed.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests