Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1996 sahara turbo auto

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 37
Joined: Sun May 11, 2008 5:54 pm
Location: esperance

1996 sahara turbo auto

Post by tazzashort »

is it possible to get a whole new engine for one of these or who in Perth is capable of rebuilding one?
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

there have been a few floating round on ebay, long motors with no manifolds or pumps etc...a fte from a 100 will also work. 6k for long motor 9k for secondhand fte
Confucious say...man who argue with idiot, worserer himself
Top
Posts: 37
Joined: Sun May 11, 2008 5:54 pm
Location: esperance

Post by tazzashort »

does that mean the bottom end is the same in the 100?
Top
Posts: 41
Joined: Tue Nov 11, 2008 6:51 pm
Location: gold coast

1hdt

Post by jackson.baker »

if its a 1hdt i have one for sale
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Re: 1hdt

Post by Hamo »

jackson.baker wrote:if its a 1hdt i have one for sale
It whould be a 1hdft and they can be brought new for around 6k at the right toyota dealer (1 in ballarat vic) often has them on ebay.
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Re: 1996 sahara turbo auto

Post by dow50r »

tazzashort wrote:is it possible to get a whole new engine for one of these or who in Perth is capable of rebuilding one?
any diesel shop or reputable rebuilder will be able to rebuild, but, cost will be 4k for parts and machining, plus their time...toyota full engine for 6 with warrenty and you can then try to sell the bits left over.....heaps better option, but where u r, it might be better getting balarat to courier one over on a pallet.
Confucious say...man who argue with idiot, worserer himself
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 82 guests