Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lower control arms rx gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 76
Joined: Thu Sep 25, 2008 3:18 pm
Location: brisbane

lower control arms rx gq

Post by fatsogq »

gday my rx has a slight vibration from take off i've been told its the pinion angle where the car has been slightly lifted(4") and that adjustable lower control arms will fix this, (if you look at the tailshaft you can see where the tube that goes in to the rubber seal is being pulled out further than on a standard car) has anybody had this problem and solved it? cheers :lol:
Top
Posts: 107
Joined: Wed Jan 30, 2008 10:33 am
Location: S/E Vic

Post by Pea-Nut »

Replace you lower control arms with 16mm longer H/D control arms and vibration will go away

Ive got 3.5inch lift in my shorty had bad vibrations till i got up 80kmh and they went away.
But once i put 16mm longer control arms in the vibrations went away 4 good.

Can bye adjustable control arms but will cost heaps or just bye 16mm longer control arms for about $130 for a pair
Top
Posts: 1111
Joined: Thu Nov 01, 2007 9:03 pm
Location: Rockhampton CQ.

Post by 5inchgq »

i put adj lower arms in my lwb got no vibrations at all ,pinion angle is sweet but i am looking to get my tailshaft lengthened slightly to give me more/standard travel in the slip joint .
Top
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

Post by waandy »

cananyone tell me how much i need to extend my rear lower control arms to suit a 4 inch lift in my shorty? was going to go 20mm but evryone seems to go 16mm
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

+ 16mm will be fine
Top
Posts: 76
Joined: Thu Sep 25, 2008 3:18 pm
Location: brisbane

Post by fatsogq »

cheers guys
Top
Posts: 52
Joined: Sun Apr 26, 2009 2:58 pm
Location: jimboomba

Post by benny4x4 »

jet-6 wrote:+ 16mm will be fine
Will these work with a 4-5inch lift in a GU wagon
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest