Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Leaking swivel hub, need tips and advice please

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Leaking swivel hub, need tips and advice please

Post by mike_nofx »

My swivel hub in my 90' WT Sierra is leaking, and i have oil making its way to my brake disc, so obviously im making it a prioroty to fix.

Just like to know what parts/seals i need to order, having never done this job before i'd hate to order only 'x seal' and realise i should have also replaced 'y seal' while everything was apart. Correct terms would be nice too, to make it easier for me when talking to Suzuki dealer.

Any tips for making the job quicker or easier?

Thanks
Mike
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

Go to any bearing or auto shop and get a swivil hub kit and reseal it all.
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

Do Suzuki sell it as a kit? or do you buy everything individually?

Apparently Suzuki seals are better than aftermarket...
Top
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

http://www.outerlimits4x4.com/ftopic127231-0.php
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

Go to a bearing shop and get NOK seals. Cant get better then them
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

I bought the swivel hub kits off ebay which had everything you need However, I did get 2 new genuine suzuki axle seals as I heard the ebay ones dont seal as well
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 265
Joined: Mon May 02, 2005 9:54 pm
Location: NEWY

Post by weaves »

Hey Mike,

I work in the bearing industry, if you buy a kit of nearly any bearing and power transmission place specific you will get japanese or better, NOK are japanese and very good consistant quality, but if you do get something like Seagull or NAK or CR (chicago rawhide, now owned by skf). your getting quality.

CBC kits will be japanese
SKF will be european
BD's kits are japanese.

you can buy felt seals individually if you have just overhauled the rest but if you haven't, for the $100 odd bux for a kit is a good investment.

...weaves
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

just get the genuine sukuki ones as mentioned earlier, sutimes they are cheaper than aftermarket.
buggy time............
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

I bought off Ebay. I got it quicker than anyone local could get it in. It had every thing and also came with new locking plates for the wheel bearing nuts. (mine where Kangaroo Edward ) had no problems except one axle seal poped out and I replaced with gen zook one. It could have gone back in ok but I binned it just to be sure.

Check the Bible, as there is a good "how to".
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests